Hydrocarbon Processing Copying and distributing are prohibited without permission of the publisher
Email a friend
  • Please enter a maximum of 5 recipients. Use ; to separate more than one email address.



Linde begins producing hydrogen-fuel stations

07.15.2014  |  HP News

Linde officials are hoping to help commercialize fuel-cell cars with better hydrogen infrastructure, saying they need more flexibility to meet rising demand in different markets.

Keywords:

Technology company The Linde Group has officially opened the world's first small-series production facility for hydrogen-fueling stations in Vienna, the company announced on Tuesday.

Linde's Vienna center was extensively modernized and expanded specifically for this project, according to company officials. Many groundbreaking hydrogen-fueling innovations have originated from this research and development hub, including Linde's energy-efficient, compact ionic compressor, the IC 90.

"The successful commercialization of fuel-cell cars hinges on a sufficiently widespread hydrogen infrastructure," said Dr. Aldo Belloni, a member of Linde's executive board. "The development of small-series production capabilities is a key milestone on this journey. It gives us the flexibility we need to meet rising demand in different markets. Our standard agreement with Iwatani shows that we are on the right path along with our partners."

At the opening ceremony, Linde and Iwatani Corp. announced that both companies had closed a deal for the delivery of 28 hydrogen fueling stations with ionic compressors. The first of these units went on stream Tuesday in Amagasaki near Osaka, Japan. 

"Iwatani would like to contribute to the development of Japan's hydrogen energy infrastructure by building on highly advanced ionic compressor technology from Linde," said Akiji Makino, CEO of Iwatani.

Unlike conventional piston-operated compressors, Linde's IC 90 works with liquid salts. Because these ionic liquids do not have a vapour pressure, they do not evaporate or mix with the hydrogen gas. They also eliminate mechanical wear-and-tear and sealing problems inside the cylinders. 

In addition, the IC 90 increases energy efficiency. Equipped with a sophisticated safety system and remote diagnosis and maintenance capabilities, the IC 90 meets all fuelling standards to ensure safe, silent fuelling and can achieve a pressure of 1,000 bar (14,500 psi) if required, according to company officials.

With this compressor, Linde says it has made a valuable and key contribution to the ongoing enhancement of today's hydrogen-fueling infrastructure.

Highlights of the new small-series production concept include a high degree of standardization across all components, which are installed in a compact 14-foot container for ease of transport and integration in existing fueling stations.

The expansion of production capacity in Vienna to 50 units a year dovetails with the introduction of the first series-produced fuel-cell cars by leading manufacturers such as Hyundai, Toyota, Honda and Daimler between 2014 and 2017. Experts predict that tens of thousands of fuel-cell cars will be traveling Europe's roads by 2018.



Have your say
  • All comments are subject to editorial review.
    All fields are compulsory.

Yakesh
07.17.2014

Hydrogen use in automobile is not solution to pollution. It is only shifting location of pollution from vehicle to hydrogen generation unit or power plant if green power is not used.

Bhaskaran R Pillai
07.17.2014

Hydrogen is the ultimate fuel for the new generation.This development is very encouraging and will play a very important role in this direction.

poorna chander gugulavath
07.16.2014

The development of IC 90 had brought new life lines for expansion of hydrogen as fuel. A great work from Linde

Carlos Simões
07.16.2014

It's crazy the use of hydrogen as a road fuel!
The cost per kW of hydrogen energy is very expensive!
Hydrogen is a very interesting but also very dangerous gas - the explosive limits are between 5 and 95%!
The hydrogen infiltrates between the molecules of most steels altering its properties?
Best for hydrogen is to use it to make liquid fuels!

John Otolorin
07.16.2014

This is great. It is the beginning of high reduction of air pollution from transportation. How will other countries get such fueling station is a big challenge.

Related articles

FEATURED EVENT


Sign-up for the Free Daily HP Enewsletter!

Boxscore Database

A searchable database of project activity in the global hydrocarbon processing industry

Poll

Should the US allow exports of crude oil? (At present, US companies can export refined products derived from crude but not the raw crude itself.)


65%

35%




View previous results

Popular Searches

Please read our Term and Conditions and Privacy Policy before using the site. All material subject to strictly enforced copyright laws.
© 2014 Hydrocarbon Processing. © 2014 Gulf Publishing Company.