Hydrocarbon Processing Copying and distributing are prohibited without permission of the publisher
Email a friend
  • Please enter a maximum of 5 recipients. Use ; to separate more than one email address.



New Developments

04.01.2012  | 

Keywords:

Communications platform enables global utilities to build and deploy grid-modernization systems

The Grid IQ Network Communications Platform is an end-to-end, industrial-grade networking communications platform. For ruggedized environments, the platform reportedly meets the single-network requirements that can support multiple-grid applications. The platform also supports utilities’ critical needs to simplify operations, lower overall operating and capital expenses, as well as provide leverage to legacy networks and end devices.

The platform is a unified IP-based network infrastructure providing connectivity to existing and emerging AMI, SCADA and other grid-automation communication applications, including:
· High-capacity fiber and microwave backhaul
· Scalable, wireless broadband communications utilizing industrial WiMAX
· A portfolio of edge-access wireless devices to extend coverage
· Field-area gateways supporting legacy systems
· A simple network management protocol-based network management system for ongoing and proactive management and maintenance

All Grid IQ Network Communications Platform components are offered for industrial applications and deployments in harsh environments. They support utilities in meeting their NERC-CIP security requirements and are standards based at all layers. GE Energy- Digital Energy

Select 10 at www.HydrocarbonProcessing.com/RS


Non-fragmenting reverse-buckling disc for gas or liquid applications

 



The PRO+KRGL reverse-buckling rupture disc for gas or liquid applications is claimed to provide a best-in-class Kr value (which determines the frictional flow loss through a rupture disc and holder) for improved flow, enabling the use of smaller piping. The disc can be used in safety-relief valve isolation, primary pressure relief or in conjunction with a safety-relief valve as secondary pressure relief.

The disc’s 95% operating ratio allows users to operate their processes near capacity without fear of the disc bursting prematurely. The PRO+KRGL is non-fragmenting, making it an ideal reverse-buckling disc for safety-relief valve isolation.

Oseco also offers the industry’s best Kr value with its FAS rupture disc, a forward-acting non-fragmenting rupture disc for safety-relief valve isolation. Oseco

Select 11 at www.HydrocarbonProcessing.com/RS


Off-the-shelf valve-actuator package provides a compact automation solution

 



The ValvXpress off-the-shelf valve-mounting kit and actuator package is said to meet the demand for high quality and quick delivery in severe-service water and steam applications. The package has proven sealing under operating conditions up to 1,400°F (760°C). ValvXpress is equipped with metal-seated ball valves ranging from ½ in. to 2½ in.; A105, F22 and F91 body materials; and it meets the needs of ANSI Class 2500 and 4500 valves. The product also provides a high-cycle actuator and mounting hardware, along with an internal valve-stem stop and a drive retainer, preventing the stem from being driven into the ball.

The ready-to-ship package includes the quality of the V1-1 valve and ValvTechnologies’ actuator, backed by a four-year, zero-leakage warranty. ValvTechnologies

Select 12 at www.HydrocarbonProcessing.com/RS


Debutanizer operator training package

The MiMiC Debutanizer operator training package is a high-fidelity operator training system for distillation columns. It is claimed to provide a complete environment for teaching safe and effective distillation column operations. Additionally, the package is also an effective tool for teaching the use and design of process controls for distillation towers. It uses MiMiC Distillation Advanced Modeling Objects for dynamic, accurate process responses.

Package features include:
· A preconfigured and tested high-fidelity dynamic model of a working debutanizer column
· Process control configurations in MiMiC models and Component Studio graphics, as well as DeltaV Simulate modules and DeltaV Operate graphics
· MiMiC Component Studio Instructor Station graphics
· Thirteen prebuilt training scenarios covering instrument failures, feed upsets, atmospheric changes and process failures
· Process snapshots for full production, production at 33% and column total reflux
· Full MiMiC software license for customization of user requirements or as a starting point for customer operator training systems. MYNAH Technologies

Select 13 at www.HydrocarbonProcessing.com/RS


Carbon-steel valve and manifold solutions for industrial-instrumentation applications

Hand valves and two-, three- and five-valve manifolds in carbon steel (a more economical material than stainless steel) have been developed by Parker’s Instrumentation Products Division. The new series is said to provide an ideal solution for natural-gas transmission lines, along with other chemical/petrochemical and power industrial-instrumentation applications that don’t require the extreme performance of stainless steel.

The carbon-steel hand valves and manifolds are pressure-rated up to 6,000 psig (414 bar) to provide system flexibility when selecting process valves for an assortment of applications. They work with Parker’s industry-leading A-LOK and CPI fittings, as well as other manufacturers’products. An external adjustable gland enables full stem-packing adjustment without removing the valve from the system. Handles are color-coded to quickly and easily identify valve functions—including test/drain, equalize and isolate—thereby avoiding errors and increasing safety. Parker Instrumentation Products Division (IPD)

Select 14 at www.HydrocarbonProcessing.com/RS


Cost-effective alternative to traditional high-temperature insulation

Superwool HT felt and Superwool HT millboard are said to be ideal for fabricating gaskets and heat shields for industrial appliances. The lightweight, multipurpose products are available in a full range of sizes, thicknesses and densities. Superwool fiber has been developed to provide the improved high-temperature characteristics required to act as an alternative to traditional refractory ceramic fiber (RCF) insulation.

The multipurpose lightweight insulating felt is made from Superwool HT fibers, reportedly the only low bio-persistent fiber available with a classification temperature of 2,372°F (1,300°C). Superwool HT felt can replace traditional RCF-based felts in applications such as expansion joints in kilns, furnaces and boiler walls, and in high-temperature gaskets.

The millboard is a rigid composite board made from Superwool fibers, an assortment of refractory fillers, and organic and inorganic binders. With good thermal shock resistance, it can be used in applications where large temperature variations occur. Superwool HT millboard comes in sizes ranging from 1/16 in. to 3/8 in. Morgan Thermal Ceramics

Select 15 at www.HydrocarbonProcessing.com/RS


Mercaptan injection confirmed with high-resolution meters

 



Telltale warnings can save lives. The first line of defense to the safe use of natural gas is an effective odorization program. This program should constantly monitor the gas flow, compute and inject the proper odorant dosage, and, most importantly, record this activity.

Typically, state regulations dictate the minimum odorant concentration. Since these odorants—Di-Methyl Di-Sulfide being the most common—are expensive, there are economic concerns regarding excessive dosing.

The odor threshold of mercaptans is approximately one part per billion. Typical mercaptan doses are in the range of 2–4 ppm (by volume, to gas); this translates to about 1–200 cc/min., depending on pipeline size and natural-gas velocity.

Sophisticated flow-monitoring equipment is essential to ensure proper dosing. Low-flow accuracy and repeatability are required, as well as easily integrated (via computer, PC and/or telemetry interface) signals.

The MAX-213 meter is used when the minimum dosage rate (averaged out on an instantaneous basis) falls below 40 cc/min.; the 214 meter is used when the minimum rate is over 40 cc/min. or the maximum rate is over 1,500 cc/min. Typical applications are either in the 1–10 cc/min. or in the 50–200-cc/min. ranges. A solid-state transmitter is required because of low flow and sudden on/off conditions usually associated with mercaptan injections (since plunger-type pumps typically are used, intermittent and/or pulsating flowrates are the rule). Max Machinery, Inc.

Select 16 at www.HydrocarbonProcessing.com/RS


High-end flowmeter with advanced features

 



The high-end FT3 thermal mass flowmeter can be used in any pure-/mixed-gas application. It is reportedly ideal for applications at refineries, petrochemical plants and natural-gas gathering/processing plants.

In addition to its robust design, the flowmeter also features:
· CAL-V in-situ calibration validation routine
· HART and RS485 Modbus optional communication protocols
· Infrared buttons—advanced programming buttons that maintain enclosure integrity
· Standard USB port
· FT3 View—software for configuring, graphing and logging data.

Other FT3 features are dual 4–20mA outputs (one for flow and the second selectable for flow or temperature) and pulse output (pulses per unit/units per pulse). The FT3’s CAL-V feature allows users to confirm that the meter is functioning properly and accurately, with just a simple push of a button. The Model FT3 performs a calibration validation test under actual operating conditions, in the pipe and at normal flow. Fox Thermal Instruments, Inc.

Select 17 at www.HydrocarbonProcessing.com/RS


Stainless-steel enclosures carry IP66 rating

 



VC4X and VH4X stainless-steel enclosures feature a continuous one-piece silicone gasket that provides an IP66 ingress rating for dust-tight and water-tight locations. Available in 304 or 316L stainless steel, the enclosures include standard lift-off door hinges, allowing easy cover removal. The standard quarter-turn door latches are designed with security in mind and include a double-bit insert. Mounting feet can be oriented in either horizontal/vertical directions, and an internal/external earth stud is included as standard.

The enclosures can be drilled to match customer-modification specifications and can be equipped with mounting DIN-rail and terminal-block assemblies. The enclosures carry the most up-to-date approvals to the most current standards and can be customized to meet most any requirement. Adalet, a Scott Fetzer Co.

Select 18 at www.HydrocarbonProcessing.com/RS


Hydrofoil mixing impeller blade and hub design promotes efficiency

 



HYFLO impellers provide a four-blade design that is reportedly 10% more efficient than a three-blade design and runs with greater stability. Featuring impeller geometries that are matched to customer mixing-speed and application requirements, these hydrofoil mixer blades are welded to the hub, in a one-piece or split-hub arrangement. This keeps the top of the impeller clean to optimize flow and mixing efficiency.

Providing high blade strength and reliability by gusseting the impeller rather than increasing blade thickness, the manufacturer claims that HYFLO impellers have been tested through CFD modeling against numerous leading hydrofoil-impeller designs, and they have consistently provided the most flow for the least power. Sizes range from 3 in. to 210 in. in diameter, and these impellers can be manufactured from 316 stainless steel, titanium and other alloys. Sharpe Mixers

Select 19 at www.HydrocarbonProcessing.com/RS


High-efficiency energy-saving hydraulic fluid field testing underway

 



SANY Heavy Industry Co., Ltd., a manufacturer of engineering machinery, is conducting a field test with the SANY new fluid formulated with DYNAVIS technology developed by Evonik Oil Additives to validate its exceptional performance in fuel savings and productivity improvements. SANY hydraulic fluid, incorporating DYNAVIS technology, has promising initial test results. In a pre-test of the fluid, the SANY excavator operator was quick to notice the increased equipment power when compared to a non-SANY-DYNAVIS fluid control.

Hydraulic fluids formulated with DYNAVIS technology enjoy a broader temperature operating range and thereby improve equipment productivity and fuel efficiency. At higher temperatures, hydraulic fluids formulated with DYNAVIS technology help reduce a pump’s internal leakage and a hydraulic fluid’s ability to lubricate is retained. As a result, power output is higher, fuel consumption goes down and the equipment is more responsive to operator controls. Even the normal “wear and tear” of seals and other hydraulic components is diminished. Evonik RohMax Additives GmbH

Select 20 at www.HydrocarbonProcessing.com/RS


Gas monitor and controller combination provides versatility and cost-effectiveness

 



iTrans fixed-gas monitors are now fully compatible with WX series controllers This new compatibility makes the WX-iTrans combination even more versatile and cost-effective. The WX series consists of the WX4 (four-channel controller), the WX16 (16-channel controller) and the WX64 (64-channel controller).

All WX controllers can be configured to receive and transmit gas readings wirelessly. Other features include RS485 ports, programmable relays, a backlit LCD screen and 24-hour data logging. The WX64 controller also has a convenient embedded web page that enables remote viewing and configuration of all 64 channels via a standard web browser. Additionally, WX series controllers offer the convenience of communicating seamlessly with each other via their analog, digital or wireless signals.

iTrans fixed-point gas monitors use an intelligent electronics platform to provide one or two points of detection from a single head for maximum flexibility, superior performance and lower installation costs. With the ability to monitor any combination of gases for a specific environment, the gas monitor uses industry-proven smart-sensor technology and safety features such as sensor recognition, all enclosed within an explosion-proof aluminum or stainless-steel housing. Industrial Scientific–Oldham S.A.S.

Select 21 at www.HydrocarbonProcessing.com/RS


Software improves vigilance of plant safe operating limits and exposes vulnerabilities

Safe operating limit information is maintained by various groups within the plant and is not readily available to operators. Thus, operators are generally unaware of the design and safety limitations of the processes they operate. inBound is a layered application for PAS’ market-leading PlantState Suite alarm management software. It aggregates, validates and displays physical constraints such as a vessel’s maximum allowable working pressure and design constraints, such as relief-valve settings and safe operating limits. These constraints may be manually entered, calculated or imported into inBound from engineering applications and databases.

inBound enables development of a boundary hierarchy and automatically detects and reports deviations from that hierarchy. This capability provides assurance that configuration parameter changes, such as alarm limits and instrument ranges, remain within the plant’s safe operating envelope.

inBound displays safe operating limits in real time and in context within the plant’s existing control-system graphics, enabling operators to proactively monitor and take action as needed to prevent violation of limits. PAS

Select 22 at www.HydrocarbonProcessing.com/RS


Precision fluidized bath series

 



The FFB-8 series is claimed to offer a wide operating range of 50ºC to 700°C (122ºF to 1,292°F), PID temperature control and a built-in dust-extraction and collection system. Model FFB-8 uses the principle of fluidization of a mass of finely divided particles to provide a safe, essentially isothermal environment with a high rate of heat transfer. This CE-compliant product is nonabrasive to any devices or parts put into the bath, including highly polished items.

The FFB-8 series is said to be a safer and cleaner alternative to conventional liquid systems and volatile salt baths, as well as more efficient with a fast recovery time after the bath is quenched. This unit is suitable for many applications, including thermal testing of sensitive components, such as wire products and delicate transducers. It can also be used as a constant temperature environment for chemical reactions. Omega Engineering, Inc.

Select 23 at www.HydrocarbonProcessing.com/RS


Low-power portable flowmeters for fieldwork and in-house testing applications

 



The MB series of portable mass flow and liquid flowmeters uses a 9-volt battery pack to make metering gas flow, pressure or water flow in the field and lab convenient and reliable. With eight to 10 hours of battery life, the flowmeters quickly and accurately measure pressure, temperature and volumetric flow in addition to mass flow. They can be used to easily verify proper operation of flowmeters and flow controllers from any manufacturer, instantly take measurements in the field, and quickly test for leaks in multiple processes/systems.

Powered by a standard 9-volt battery, lightweight MB series meters fit easily into a pocket or work bag. In permanent installation applications, the units may also be hardwired or wall powered, with the battery serving as a backup during power loss to maintain critical operations monitoring.

Alicat’s patented laminar-flow differential-pressure technology delivers accurate results with a much faster response time than that of competing technologies. Devices come pre-calibrated (NIST traceable) for air, hydrogen, helium and argon, as well as 16 other gases and 10 gas mixes. Alicat Scientific

Select 24 at www.HydrocarbonProcessing.com/RS


Stainless-steel coalescing filter removes oil particles from hydrocarbon gas or air

 



A stainless-steel coalescing filter protects sensitive equipment by removing oil from compressed hydrocarbon gas or compressed air used to power operations in corrosive environments such as refineries and chemical plants. The F22H is constructed of 316 stainless steel and its metallic parts meet NACE Standard MR-01-75, resisting sulfide stress cracking and discoloration in corrosive environments.

The ½-in. ported filter is designed with a large convoluted filter element, creating a large surface area to deliver high flow with minimal pressure drop. The filter has a stainless-steel manual drain. It is also available with an automatic drain that opens when a specified liquid level is attained, making it especially well suited for unmanned satellite platforms.

The F22H coalescing filter’s maintenance cycle is extended when used as part of Norgren’s three-stage filtration system. Two general-purpose filters placed upstream remove water and particles of 25 microns and then 5 microns before they can contaminate the coalescing oil-removal element. The three-stage system comes with brackets for panel mounting to fit into a compact footprint. Both the stand-alone filter and the three-stage system are available with a stainless-steel and nylon service-life indicator that shows when the filter element is contaminated. Norgren

Select 25 at www.HydrocarbonProcessing.com/RS


Static motor-analysis equipment provides broad functionality

SKF Static Motor Analyzer–Baker DX models, which will replace the older-generation Baker D-series and ST series surge-test analyzers, reportedly perform motor and generator analysis faster and more accurately than previous generation models. The new instruments are said to efficiently and accurately identify potential problems with motors and generators to prevent breakdowns.

These analyzers now include low-voltage inductance, impedance, phase angle and capacitance, coil and DC step voltage tests in a smaller, lighter-weight portable unit. Like their predecessors, these analyzers also conduct winding resistance, megohm, DC HiPot, surge tests and DC bar-to-bar armature tests. All units come with a more intuitive, easy-to-navigate touch-screen graphical user interface, and can be ordered in an array of configurations.

Baker DX series analyzers can perform motor tests from 4 kV to 40 kV (with an optional power pack), and can be configured with customer-specified test functions. They are available in 4-kV, 6-kV, 6-kV high output (HO), 12-kV and 12kV HO versions, along with an array of configuration options and accessories. SKF CMC-Fort Collins

Select 26 at www.HydrocarbonProcessing.com/RS



Have your say
  • All comments are subject to editorial review.
    All fields are compulsory.

Related articles

FEATURED EVENT


Sign-up for the Free Daily HP Enewsletter!

Boxscore Database

A searchable database of project activity in the global hydrocarbon processing industry

Poll

Should the US allow exports of crude oil? (At present, US companies can export refined products derived from crude but not the raw crude itself.)


65%

35%




View previous results

Popular Searches

Please read our Term and Conditions and Privacy Policy before using the site. All material subject to strictly enforced copyright laws.
© 2014 Hydrocarbon Processing. © 2014 Gulf Publishing Company.