http://www.hydrocarbonprocessing.com/RSS.aspx?FeedID=1714©2013 Hydrocarbon Processing60Process Engineering - Engineering & Designhttp://www.hydrocarbonprocessing.com/Article/3213542/Are-you-using-pinch-technology-effectively-in-your-daily-operationsPart-1.htmlSat, 01 Jun 2013 00:00:00 GMTEnergy efficiency doesn’t imply producing less to reduce energy consumptions, but rather improving plant productivity and effectiveness, allowing plants to produce the same amount of product with fewer resources.http://www.hydrocarbonprocessing.com/Article/3213538/Can-process-automation-increase-energy-efficiency.htmlSat, 01 Jun 2013 00:00:00 GMTA study was conducted using a series of FCC catalysts that included reduced rare-earth content and increased zeolite Y quantity systems. The goal was to raise gasoline yield along with greater yields of olefins.http://www.hydrocarbonprocessing.com/Article/3213535/Case-history-New-developments-with-lower-catalyst-to-feed-ratios-for-FCC-units.htmlSat, 01 Jun 2013 00:00:00 GMTBy changing only the crank-end head, piston and rod assembly, the same cylinder body can be mounted on any of the common 5-in. to 7-in. stroke compressor frames that have been manufactured in the last five decades. http://www.hydrocarbonprocessing.com/Article/3212797/Gain-more-flexibility-with-special-liners-for-reciprocating-compressor-cylinders.htmlSat, 01 Jun 2013 00:00:00 GMTWith the fluctuation of natural gas pricing, it is important to evaluate technically feasible solutions and choose the most economical alternative. Ultimately, this leads to a simpler and more cost-effective solution.http://www.hydrocarbonprocessing.com/Article/3213536/How-to-select-the-best-fired-heater-for-your-operations.htmlSat, 01 Jun 2013 00:00:00 GMThttp://www.hydrocarbonprocessing.com/Article/3213541/Optimize-crude-preheat-train-to-balance-efficiency-and-operability.htmlSat, 01 Jun 2013 00:00:00 GMThttp://www.hydrocarbonprocessing.com/Article/3198510/Asset-information-management-improves-life-cycle-benefits-for-equipment.htmlWed, 01 May 2013 00:00:00 GMThttp://www.hydrocarbonprocessing.com/Article/3198522/Avoid-hidden-costs-of-suction-specific-speed-in-pumping.htmlWed, 01 May 2013 00:00:00 GMThttp://www.hydrocarbonprocessing.com/Article/3199134/Case-72-Interaction-between-disciplines-when-troubleshooting.htmlWed, 01 May 2013 00:00:00 GMThttp://www.hydrocarbonprocessing.com/Article/3198969/Consider-both-actual-and-virtual-spare-parts-inventory.htmlWed, 01 May 2013 00:00:00 GMThttp://www.hydrocarbonprocessing.com/Article/3198518/Consider-integral-gear-compressors-in-CO2-services.htmlWed, 01 May 2013 00:00:00 GMTIn the presented case study, an innovative design for an integrated CGC-DeC3 system introduces part of the heavier condensate from the early compression stages directly into the high-pressure (HP) depropanizer.http://www.hydrocarbonprocessing.com/Article/3199068/Consider-novel-CGC-and-front-end-depropanizer-system-for-olefins-production.htmlWed, 01 May 2013 00:00:00 GMThttp://www.hydrocarbonprocessing.com/Article/3199073/Enhance-operation-and-reliability-of-dividing-wall-columns.htmlWed, 01 May 2013 00:00:00 GMThttp://www.hydrocarbonprocessing.com/Article/3198904/Investigate-power-limitations-in-a-large-steam-turbine.htmlWed, 01 May 2013 00:00:00 GMThttp://www.hydrocarbonprocessing.com/Article/3198499/Manage-your-time-constructively.htmlWed, 01 May 2013 00:00:00 GMThttp://www.hydrocarbonprocessing.com/Article/3199124/Optimize-vacuum-ejector-operations.htmlWed, 01 May 2013 00:00:00 GMTRerating your installed compressors and steam turbines can become a cost-effective, time-saving solution for increasing throughput without having to invest in new equipment. http://www.hydrocarbonprocessing.com/Article/3198838/Rerating-rotating-equipment-optimizes-olefins-plant-performance.htmlWed, 01 May 2013 00:00:00 GMTTop industry professionals believe users must reach beyond typical standards in applying safer mechanical seals when hazardous and toxic chemicals are involved.http://www.hydrocarbonprocessing.com/Article/3198916/Seal-safety-may-require-going-beyond-typical-standards.htmlWed, 01 May 2013 00:00:00 GMThttp://www.hydrocarbonprocessing.com/Article/3198401/US-demand-for-corrosion-inhibitors-to-reach-25-billion.htmlWed, 01 May 2013 00:00:00 GMT