| Provider | Profile | Product/Service | Office Region |
|---|
24Hr SAFETY
4912 Railroad Ave
Deer Park, TX 77536
United States
Todd Dartez
Phone: 281-479-2407
Fax: 281-479-2404
todd@24hr-safety.com
www.24hr-safety.com
| 24Hr Safety provides an extensive variety of safety rentals, services and product sales. Our focus is our commitment to providing superior safety solutions for our customers. Our industry experience, coupled with our dedicated employees, make this commitment possible. Visit the 24Hr Safety website at www.24hr-safety.com | Blowers,Confined-Space
Communication Systems,Confined Space
Detectors,Gas
Detectors,Portable Gas
Detectors,Portable Leak
Fire Extinguishers,Inspections
Fire Extinguishers,Portable/Hand- held
Fire Protection,
Firefighting,Equipment
Gas Detection,Equipment and Services
Hose Reels,
Lighting,Confined-Entry
Lighting,Explosion-Proof
Lighting,Fixtures - Hazardous Location
Lighting,Low-Voltage
Lighting,Low-Voltage Portable
Meters,Gas
Monitoring,Air Quality
Monitoring,Confined-Space - Gas
Monitors,Confined-Space, Communication, Respiratory
Monitors,Gas
OSHA,Compliance Training
Personnel Monitoring Confined Entry,
Portable,Breathing Air Systems
Protective Garments,
Rescue,Equipment
Rescue,Services
Respirators,Accessories
Respirators,Cartridges, Wipe Pads,Covers,Cleaner
Respirators,Respirators
Safety,Body-Cooling Vests
Safety,Cardiopulmonary Resuscitation/First Aid Training
Safety,Emergency Drench Shower and Eye-Wash Station
Safety,Equipment
Safety,Eye-Wash Stations, Safety Showers
Safety,Fall Protection
Safety,Fire Detection and Monitoring - Flame and Smoke
Safety,Full Body Harness
Safety,Training
Smoke Detectors,
Tanks,Ventilators
Two-Way Radios, | North America:United States |
A & L VALVE AND FITTING
8550 Hansen Street,Suite A
Houston, TX 77075
United States
Anthony Luprete Jr
Phone: 713-643-4400
Phone: 800-554-3133
Fax: 713-643-4470
sales@aandlvalve.com
www.aandlvalve.com
| A & L Valve and Fitting, L.P. has been supplying the refining, chemical, power, hydrocarbon, and oilfield industries since 1991. We have one of the largest inventories in the nation, stocking special, hard to find, non stock items. We compliment our inventory with Williams commodity cast carbon and stainless gate, globe, ball, and check valves. We also stock Steamco boiler valves in both cast iron and carbon steel in sizes 2 ½” through 10” sizes. The material ranges in stock include F-11, F-22, F-91, Monel, Hastelloy, and Duplex to name a few. Our experienced sales staff can answer any of your technical questions from valve design to automation. We also stock electric, hydraulic, and pneumatic actuators for your specific application. All of our products come with a one year warranty against defects and workmanship, and are also covered by product liability insurance. So if you are looking for that hard to find valve, call A& L Valve and Fitting today. | Valves,Angle
Valves,Ball
Valves,Bellows-Seal
Valves,Bellows-Sealed Ball
Valves,Block & Bleed
Valves,Boiler
Valves,Butterfly
Valves,Calobri
Valves,Carbon-Steel
Valves,Champion
Valves,Check
Valves,Compression Fitting
Valves,Compressor
Valves,Cryogenic
Valves,Diaphragm
Valves,Drain
Valves,Floating Ball
Valves,Fluoroseal
Valves,Flush Bottom
Valves,Forged High-Pressure Ball
Valves,Four-Way
Valves,Gate
Valves,Globe
Valves,Globe & Angle Non-Return Boiler
Valves,High Pressure
Valves,High-Alloy
Valves,High-Alloy Ball
Valves,High-Performance Butterfly
Valves,Jacketed
Valves,Knife Gate
Valves,Lined Ball
Valves,Metal Seated
Valves,Needle
Valves,New and Used
Valves,Piston
Valves,Plug
Valves,Plug, Lined
Valves,Sampling
Valves,Severe Service
Valves,Steam
Valves,Swing and Lift Check
Valves,Trunion-Mounted Ball
Valves,Wafer Check
Valves,Wafer or Lug Body | North America:United States |
ADALET
4801 W. 150th Street
Cleveland, OH 44135
United States
Matthew R. Piecuch
Phone: 216-267-9000 ext.210
Fax: 216-267-1681
MPiecuch@adalet.com
www.adalet.com
| For more than 85 years, Adalet, a division of Scott Fetzer, has been an industry leader in the design and development of enclosure systems and cable accessories.
Established in 1926 to manufacture conduit and cable fittings, Adalet today offers the most extensive line of enclosures and fittings to the hazardous and non-hazardous environment markets. Our engineered enclosure systems include explosion-proof and stainless-steel junction boxes, motor control enclosures, meter and instrument housings, and increased safety terminal and control enclosures. The Adalet product line also includes pilot devices, conduit and cable accessories, high-voltage cable couplers, and other related electrical products for industry. These products are suitable for NEMA type 1 through NEMA type 13 applications.
Our enclosures carry an extensive list of certifications and approvals both domestically and internationally. UL, CSA, FM, ATEX, IECEx, GOST-R, and Kosha approvals are among some of the certifications we offer.
Adalet’s 120,000 sq ft manufacturing facility houses its own aluminum foundry and pattern shop which provides quality castings for our state-of-the-art CNC machining and turning centers. With the continuing acquisition of this state-of-the-art equipment, our manufacturing department has become the epitome of efficiency keeping quick deliveries a high priority. We pride ourselves on our quality and workmanship, and with our manufacturing facility being ISO 9001 certified, we can assure you that your product will be made right the first time.
Please contact us to learn more about Adalet products, engineering services and our company-wide commitment to quality.
| Arrestors,Flame
Couplings,Flexible
Devices,Explosion-proof pilot
Electricity,Circuit Breakers
Electricity,Electrical Enclosures
Electricity,Motor Starters
Enclosures,Electrical
Enclosures,Explosion-proof
Enclosures,Explosion-proof Control
Enclosures,Explosion-proof Instrument
Enclosures,Explosion-proof Junction Boxes
Enclosures,Explosion-proof Meter Housings
Enclosures,Explosion-proof, ATEX Control
Enclosures,Fiberglass
Enclosures,High-voltage Terminal
Enclosures,Increased Safety
Enclosures,NEMA-Rated - NEMA 4X, NEMA 7, NEMA 9
Enclosures,Non-metallic
Enclosures,Polycarbonate
Enclosures,Stainless-steel
Enclosures,Stainless-steel - Double-door
Enclosures,Stainless-steel - Wall-mount
Enclosures,Terminal
Fittings,Electrical - Explosion-proof
Flame Arrestors,
Instruments,Explosion-proof Instrument Enclosures
Motor Control,Explosion-proof Circuit Breakers
Motor Control,Explosion-proof Disconnects
Motor Control,Explosion-proof Motor Starters
Nema 1, 3r, 4, 4x and 12 Boxes,
Panelboards,Explosion-proof
Panelboards,Factory-sealed
Panelboards,Type 4X Stainless-steel
Sheet Steel,Boxes and Enclosures | North America:United States |
ALSTOM POWER, INC. AIR PREHEATER COMPANY
Raymond Operations,4525 Weaver Parkway, Suite 250
Warrenville, IL 60555
United States
Dave Dahlstrom
Phone: 630-393-1000
Fax: 630-393-1001
info@airpreheatercompany.com
www.airpreheatercompany.com
| Alstom Power, Inc., Air Preheater Company, Raymond Operations is a leading supplier of engineered products, services and technologies for size reduction, classification and thermal processing. Bartlett-Snow and Raymond equipment is known for its quality and performance, and is supported by our technical staff, pilot plant testing facility, OEM replacement parts and service departments. Bartlett-Snow rotary calciners, kilns, dryers and coolers, and Raymond flash drying equipment/systems provide solutions for thermal processing applications worldwide. The Raymond size reduction product line includes equipment and systems for pendulum roller mills, impact mills, vertical hammer mills, table roller mills, jet-stream and hybrid turbine classifiers. Raymond Operations has been in operations since 1885 and was consolidated into the Air Preheater Company in 1995. The Air Preheater Company began its core operation in the production of regenerative air preheaters in Wellsville, New York in 1925 and today is a leader in the development of energy recovery and auxiliary products for power generation and industrial processing equipment. The operation has approximately 700 employees, and is owned by ALSTOM, a full service provider of power generation and transportation services and equipment, with headquarters in Paris, France and employing over 69,000 people in 70 countries. The Air Preheater Company has manufacturing plants in Wellsville, New York, Concordia, Kansas, and Vinhedo, Brazil, as well as a research and development facilities in Wellsville and a 25,000 square foot pilot plant testing facility in Naperville, Illinois. | Calciners,
Coolers,Rotary
Dryers,Flash
Dryers,Rotary
Kilns,Rotary
Mills,
Mills,Hammer
Mills,Roller
Pulverizers, | North America:United States |
ALTAIRSTRICKLAND
1605 South Battleground Road
La Porte, TX 77571
United States
Whitney Strickland
Phone: 281-478-6200
Phone: 281-817-2135
Fax: 281-478-6206
wstrickland@altairstrickland.com
www.altairstrickland.com
| AltairStrickland is a specialty mechanical contracting company. They have been executing turnarounds and providing emergency repair services since 1976. Not only do they perform TA/capital project fieldwork, but they also provide project planning, cost control, management services and help process design and engineering firms address difficult constructability issues.
AltairStrickland first established their reputation as being expert in FCCUs—the heart of every plant—but their expertise has grown so that today they also are known for their expertise in coker unit work, general turnaround work and for their outstanding record in both safety and productivity.
| Construction,Refinery
Contractors,Chemical Processing - General Contractor
Contractors,General
Contractors,Mechanical - Millwrights, Fabricators
Pipe,Fabrication, Carbon-Steel
Pipe,Fabrication, Stainless-Steel
Pipe,Piping Subcontractor
Planning and Scheduling,
Procurement and Expediting,Services
Project,Management and Controls
Project Controls,Services - Cost Estimating
Refinery General Contractor,
Turnaround Services,Management and Construction
Turnaround Services,Planning and Scheduling
Turnarounds,Turnaround Support: Into your Workforce or Turnkey
Vessels,ASME Repair | North America:United States |
AMETEK Test & Calibration Instruments
8600 Somerset Drive
Largo, FL 33773
United States
Scott Crone
Phone: 727-538-6000
Phone: 800-527-9999
Fax: 727-539-6882
cal.info@ametek.com
www.jofra.com
| AMETEK Calibration Instruments. We are one of the leading manufacturers and developers of calibration instruments for temperature, pressure and process signals, as well as for temperature sensors both from a commercial and a technological point of view. | Calibration,Laboratory Grade
Equipment,Hand Held Calibration
Gauges,Deadweight
Instrument Calibration & Repair,Pressure Instruments
Instrument Calibration & Repair,Temperature Instruments
Instruments,Calibration
Specialty Services,Gases Calibration
Temperature,Indicators
Temperature,Probes
Testers,Deadweight
Thermometers, | North America:United States |
ASHCROFT, INC.
250 East Main Street
Stratford, CT 06614-5145
United States
Customer & Sales Support
Phone: 203-378-8281
Phone: 800-328-8258
Fax: 203-385-0408
info@ashcroft.com
www.ashcroft.com
| For over 150 years, Ashcroft instruments have set the standards for accuracy, quality, and dependability in pressure and temperature measurement.
With products to suit virtually any application, Ashcroft pressure gauges, temperature instruments, pressure and temperature switches, transducers and transmitters are specified and trusted around the world for the most demanding requirements. In chemical processing, oil refineries, power plants, pharmaceutical, food, and industrial equipment applications, the Ashcroft trademark is the industry standard for performance and reliability.
| Gauges,Deadweight
Gauges,Differential Pressure
Gauges,Pressure - Ashcroft
Gauges,Stainless-Steel Pressure
Indicators,Differential Pressure
Pressure,Transducers and Transmitters
Seals,Diaphragm
Switches,Pressure - Ashcroft
Switches,Temperature - Ashcroft
Testers,Deadweight
Thermometer,Ashcroft
Thermometer,Bimetal - Ashcroft
Thermometer,Digital RTD - Ashcroft
Thermowells,Ashcroft
Transducers,Ashcroft Pressure & Temperature
Transmitters,Digital Pressure
Transmitters,Explosion-Proof Pressure
Transmitters,Flush Diaphragm Pressure
Transmitters,Intrinsically Safe Pressure
Transmitters,Smart Pressure | North America:United States |
ATLAS COPCO GAS AND PROCESS
3037 Industrial Parkway
Santa Maria, CA 93455
United States
Brian Humbles, Service Operations Manager
Phone: 805-928-5757
Fax: 805-925-3861
aftermarket.mtc@us.atlascopco.com
www.atlascopco-gap.com.
| Atlas Copco Gas and Process is a global leader for turbo compressors, expansion turbines and SMP cryogenic LNG pumps. The Gas and Process division is within Atlas Copco’s Compressor Technicque business area and is committed to help customers around the world enjoy sustainable productivity. That is why we offer a complete range of aftermarket solutions utilizing our market leading manufacturing capabilities (including parts manufacturing) and our internationally recognized engineering expertise. Present in 170 markets worldwide, our aftermarket products and services ensure your operations continue to run smoothly, now and in the future. When it comes to Atlas Copco turbocompressors, truboexpanders, and cryogenic pumps, our global presence allows us to respond quickly and comprehensively to customer needs. To ensure optimal performance, we interact closely with our customers, and we provide forward-looking customer service tailored to support your specific process. From installation and commissioning, to maintenance, repair and reconditioning – we are with you every step of the way to ensure optimum machine performance and reliability. We are available by phone and email around the clock and have a complete international team of professional and experienced field service engineers available at a moment’s notice. | Blowers,Centrifugal
Blowers,Multi-Stage Centrifugal
Blowers,Turbo
Comissioning,Instrument
Compressors,Centrifugal
Compressors,Gas Compressor Stations
Compressors,Multi-Stage Centrifugal Air
Compressors,Single or Two-Stage Process
Compressors,Turbocharged
Cryogenics,
Engineering,Designing
Engineering,Systems, Instrumentation
Equipment,Power Recovery
Equipment,Waste-Heat Recovery
Expander Compressors,
Generators,Electric (expander generator - geothermal)
Heat Recovery,
Maintenance,Refinery (gas processing)
Pumps,SMP Cryogenic LNG
Pumps,Submersible
Revamps and Modifications,
Software,Simulation (HYSIS-ECOD)
Turbines,Components
Turbines,Impellers
Turbines,Overhauls
Turbines,Radial Expansion
Turbines,Repair
Turbomachinery,Air Separation Turboexpanders
Turbomachinery,Engineering and Design
Turbomachinery,Systems - Automation and Controls
Turbomachinery,Turboexpanders | North America:United States |
AUSTIN INDUSTRIAL
P. O. Box 87888,8031 Airport Blvd, 77061
Houston, TX 77287-7888
United States
Leann Williams
Phone: 713-641-3400
Fax: 713-641-2424
LWilliams@AustinIndl.com
www.austin-ind.com
| Austin Industries, one of the largest and most diversified general contracting firms in the nation, has a rich history. In 1902, Frank and George Austin began the fabrication and installation of iron truss bridges across Texas and Georgia, advancing the transportation infrastructure to meet the new demands of automobiles. Charles R. Moore, a manager of the Austin Brothers Bridge Company, purchased the contracting portion of the company in 1918, modifying the name to Austin Bridge Company. Adapting to economic conditions and social change for more than five decades, Austin Industries the holding company was formed in 1974 as a managing entity. Today, Austin Industries oversees the operation of three companies Austin Bridge & Road, Austin Commercial and Austin Industrial.
The Austin Industries Employee Stock Ownership Plan (ESOP) was instituted in 1986, transferring 60 percent of company ownership to employees over the next two years. By 2000, Austin Industries was 100 percent employee-owned. Today, with more than 6,000 employee-owners invested in the stewardship of Austin Industries, revenues approach $2 billion. Austin Industrial provides construction, maintenance, turnaround and specialty services to the oil, gas and chemical, power and energy, and manufacturing industries.
| Construction,Project Management
Contractors,Acid-Proofing
Contractors,Chemical Processing - General Contractor
Contractors,Equipment Erection
Contractors,Insulation
Contractors,Piping
Contractors,Sandblasting
Fireproofing,Structural-Steel
Maintenance,Plant Maintenance Services
Project,Controls Services: Cost Estimating
Scaffolding,Scaffolding & Access Systems, Sales, Rental & Lease
Scaffolding,Services
Steel,Erector
Subcontractor,Fireproofing
Subcontractor,Insulation
Subcontractor,Mechanical - Repair/New Construction
Subcontractor,Painting
Subcontractor,Structural Construction
Turnaround Services,Management and Construction
Turnarounds,Planning and Scheduling Services for Turnarounds
Turnarounds,Turnaround Support: Into your Workforce or Turnkey | North America:United States |
BABBITT STEAM SPECIALTY CO.
judy@babbittsteam.com,800 Mt. Pleasant Street
New Bedford, MA 02745
United States
Judith Mulrooney
Phone: 508-995-9534
Phone: 800-727-4323
Fax: 508-995-2701
sprocket@babbittsteam.com
www.babbittsteam.com
| Babbitt Steam Specialty Company has manufactured chainwheels to operate valves in hard-to-reach locations for over a century. The Babbitt Adjustable Chainwheels with Chain Guides operate valves, in high, normally out-of-reach locations easily and economically. Chainwheels attach to the hand wheel of any size valve, ranging from 2 to 36 inches in diameter, allowing valves to be opened and closed from the floor.
Each configuration of our product was developed as a better way to meet a specific customer’s need. The Babbitt Safety Wheel was designed in response to the increased need for improved plant safety. The Babbitt Safety Wheel dramatically reduces the potential hazard of a falling valve hand wheel to which a Babbitt Safety Wheel is attached. Safety Cap Kits are available for retrofit applications. Chainwheels are available in a solid hub design for direct attachment to valve hand wheel stem. All chainwheels except solid hubs are furnished complete with standard zinc plated carbon steel or 316 stainless steel attachment sets. Hammer-Blow units to operate high pressure valves are provided in ductile iron. Babbitt recommends use of hot dipped galvanized, 304 stainless steel or spark resistant brass lock-link chain and Babbitt Master links.
| Actuators,Manual
Chainwheels,Valve
Valve Chainwheels,Babbitt Masterlink Chain Link Reliable Connector
Valve Chainwheels,Chain Operators and Handwheels, Valves
Valve Chainwheels,Manual Valve Operators, Impact Type
Valve Chainwheels,Valve Chain Operators
Valve Chainwheels,Valve Safety Chainwheel | North America:United States |