| |
– A – |
|
Date |
|
|
|
|
|
|
Abdi, M. A. |
|
|
|
|
Choosing
the wrong flame arrestor can prevent capacity enhancement |
|
Aug-07 |
|
|
Improve contaminant control in amine systems |
|
Oct-01 |
|
|
|
|
|
|
Aaljoki, Kari |
|
|
|
|
Dynamic real-time optimization increases ethylene plant profits |
|
Oct-06 |
|
|
|
|
|
|
Abma, Wiebe R. |
|
|
|
|
Control FCC flue-gas emissions |
|
Jul-00 |
|
|
|
|
|
|
Abrardo, J. M. |
|
|
|
|
Produce CO-rich synthesis gas |
|
Apr-99 |
|
|
Hydrogen technologies to meet refiners’ future needs |
|
Feb-95 |
|
|
|
|
|
|
Abry, R.G.F. |
|
|
|
|
Amine plant troubleshooting and optimization |
|
Apr-95 |
|
|
|
|
|
|
Absi-Halabi, Mamun |
|
|
|
|
Trends in catalysis research to meet future refining needs |
|
Feb-97 |
|
|
|
|
|
|
Adamo, E.M. |
|
|
|
|
Predict NOx from gas-fired furnaces |
|
Nov-96 |
|
|
|
|
|
|
Adams, David J. |
|
|
|
|
How to efficiently plan a grassroots refinery |
|
Jun-01 |
|
|
|
|
|
|
Adams, V. |
|
|
|
|
Multivariable controller increased MTBE complex capacity |
|
Mar-97 |
|
|
|
|
|
|
Adamson, K. |
|
|
|
|
Data asset approach to plant design |
|
Feb-99 |
|
|
|
|
|
Affalter,
R. |
|
|
|
|
Ultrasonic
flowmeters solve molten sulfur flow and metering problems |
|
Mar-07 |
|
|
|
|
|
Agarwal, Sudhir |
|
|
|
|
Troubleshooting repetitive failure of a CO2 compressor rotor |
|
Jan-06 |
|
|
|
|
|
|
Aggarwal, Vivek |
|
|
|
|
Improve NGL recovery |
|
May-01 |
|
|
|
|
|
|
Agius, Nick |
|
|
|
|
Optimize air-cooled heat exchanger performance |
|
Jul-06 |
|
|
|
|
|
|
Agnihotri, Raj B. |
|
|
|
|
Rationalizing PID tuning with a model-based approach |
|
Sep-02 |
|
|
|
|
|
|
Agrawal, Atul |
|
|
|
|
Consider adopting next-generation refinery scheduling |
|
Sep-06 |
|
|
Use an enterprise portal to link plant data with refinery planning tools |
|
Oct-04 |
|
|
|
|
|
|
Agrawal, D. |
|
|
|
|
Select the correct LNG storage tank for your facility |
|
Jan-04 |
|
|
|
|
|
|
Agrawal, S.S. |
|
|
|
|
Integrate blending control, optimization and planning |
|
Aug-95 |
|
|
|
|
|
|
Aguado, José Manuel |
|
|
|
|
Minimize furnace tubes carburization |
|
Sep-06 |
|
|
|
|
|
|
Aguilar-Otero, José R. |
|
|
|
|
Consider a risk-based inspection program to improve safety and availability |
|
Feb-03 |
|
|
|
|
|
|
Ahluwalia, K.S. |
|
|
|
|
Use dynamic modeling to improve training programs |
|
Oct-97 |
|
|
|
|
|
|
Ahmad, Munir |
|
|
|
|
Can project success and failure be predicted? |
|
Feb-00 |
|
|
|
|
|
|
Ahmed, Mujeeb M. |
|
|
|
|
Producing product and change together |
|
Jul-00 |
|
|
Manage the design process for competitive advantage |
|
Jul-99 |
|
|
|
|
|
|
Aiello, James G. |
|
|
|
|
Consider new technologies for low-cost methanol operations |
|
Apr-05 |
|
|
|
|
|
|
Aisenbrey, E.J. |
|
|
|
|
Computer delivery of operating and maintenance procedures |
|
May-96 |
|
|
|
|
|
|
Akande, Dr. Benjamin Ola |
|
|
|
|
Kuwait: A country and a corporation |
|
Feb-97 |
|
|
|
|
|
|
Akhtar, Omer |
|
|
|
|
Unique online leak repair techniques |
|
May-04 |
|
|
|
|
|
|
Akhtar, S. Zaheer |
|
|
|
|
Calculate hydrocarbon dew point for natural gas |
|
May-05 |
|
|
Sizing pumps for slurries |
|
Nov-96 |
|
|
|
|
|
|
Al-Baiyaa,
M. |
|
|
|
|
Novel
approach for process plant monitoring |
|
Mar-08 |
|
|
|
|
|
|
Al Beed, Ali A. |
|
|
|
|
Effect of process deposits on the corrosion behavior of titanium in brine |
|
Oct-05 |
|
|
|
|
|
|
Al-Ahmad, Abdulaziz A. |
|
|
|
|
Middle East: growth and issues for the petrochemical industry |
|
Apr-05 |
|
|
|
|
|
|
Alanis, F. J. |
|
|
|
|
Reduce revamp costs by optimizing design and operations |
|
Apr-07 |
|
|
|
|
|
|
Albano, J. V. |
|
|
|
|
Design pyrolysis heaters using CFD models |
|
Jul-97 |
|
|
|
|
|
|
Albers, J. E. |
|
|
|
|
Nonlinear model-based control of a heat exchanger |
|
Nov-99 |
|
|
Online data reconciliation and error detection |
|
Jul-97 |
|
|
Data reconciliation with unmeasured variables |
|
Mar-94 |
|
|
|
|
|
|
Alesson, T. |
|
|
|
|
All steam traps are not equal |
|
Aug-95 |
|
|
|
|
|
|
Alevizos,
George |
|
|
|
|
Employing
chemical engineers to make money in refineries |
|
Apr-08 |
|
|
|
|
|
|
Alexander, Charles |
|
|
|
|
Revamp induced-draft fan performance |
|
Dec-04 |
|
|
|
|
|
|
Alexander,
R.E. |
|
|
|
|
Use new
detectors to find halogenated contaminants |
|
Feb-95 |
|
|
|
|
|
|
Ali,
R. |
|
|
|
|
Online
transfer from an analog electronic control system to a modern DCS |
|
Mar-08 |
|
|
|
|
|
|
Alkabbani, A. S. |
|
|
|
|
Reforming catalyst optimization |
|
Jul-99 |
|
|
|
|
|
|
Al-Khowaiter, A. R. |
|
|
|
|
Redesign machinery for greater reliability |
|
Oct-99 |
|
|
|
|
|
|
Al-Khowaiter, Abdulrahman |
|
|
|
|
Apply mechanical reliability principles to turbomachinery design |
|
Oct-00 |
|
|
|
|
|
|
Allawi, A. |
|
|
|
|
Minimize air-toxic emissions |
|
Aug-94 |
|
|
|
|
|
|
Allevi,
C. |
|
|
|
|
What
are possible hydrogen sources for refinery expansions? |
|
Feb-08 |
|
|
|
|
|
|
Al-Azri |
|
|
|
|
Optimize
heat transfer networks |
|
Mar-08 |
|
|
|
|
|
|
Al-Hashimi |
|
|
|
|
Reduce
greenhouse gas emissions and gain carbon credits |
|
Dec-07 |
|
|
|
|
|
|
Al-Mady, Mohamed H. |
|
|
|
|
ACHEMA 2006 and beyond: Saudi Arabia |
|
May-06 |
|
|
ACHEMA 2003 Perspective: Saudi Arabia |
|
May-03 |
|
|
|
|
|
|
Alma-Zeestraten, Colette |
|
|
|
|
ACHEMA 2006 and beyond: The Netherlands |
|
May-06 |
|
|
|
|
|
|
Al-Meshari, Abdulaziz |
|
|
|
|
Failure analysis of a primary reformer riser |
|
Nov-03 |
|
|
|
|
|
|
Al-Mohssen, H. |
|
|
|
|
Retrofitting multijack tensioners on a combustion gas turbine generator |
|
Jan-02 |
|
|
|
|
|
|
Al-Mutairi, Ahmed H. |
|
|
|
|
Reduce underside corrosion in aboveground storage tanks |
|
Jan-03 |
|
|
|
|
|
|
Al-Mutaz, I.S. |
|
|
|
|
How to implement a gasoline pool lead phase-down |
|
Feb-96 |
|
|
|
|
|
|
Alonso, F. |
|
|
|
|
Integrated terminal operations improves profitability |
|
May-97 |
|
|
|
|
|
|
Al-Azri,
N.A. |
|
|
|
|
Integrated
techniques for low-cost process debottlenecking |
|
Sep-07 |
|
|
|
|
|
|
Al-Rabie, M. |
|
|
|
|
Failure analysis of a primary reformer riser |
|
Nov-03 |
|
|
|
|
|
|
Al-Sonidah, Mohammed N. |
|
|
|
|
Effect of process deposits on the corrosion behavior of titanium in brine |
|
Oct-05 |
|
|
|
|
|
|
Al-Subai,
Saud |
|
|
|
|
Effect
of process deposits on the corrosion behavior of titanium in brine |
|
Oct-05 |
|
|
|
|
|
|
Al-Thubaiti,
M. |
|
|
|
|
Integrated
techniques for low-cost process debottlenecking |
|
Sep-07 |
|
|
|
|
|
|
Altena, Wim |
|
|
|
|
Consider variable-speed, motor-driven compressors in refrigeration units |
|
Aug-00 |
|
|
|
|
|
|
Aly,
S. |
|
|
|
|
Fuzzy
approach for cascaded refrigeration synthesis |
|
Mar-08 |
|
|
|
|
|
|
Alveal, Enrique Dávila |
|
|
|
|
Refiner uses cogeneration project to revamp for high-sulfur crudes |
|
Dec-99 |
|
|
|
|
|
|
Ambrose, L. |
|
|
|
|
Maximize equipment investments through strategic teaming |
|
Sep-99 |
|
|
|
|
|
|
Amir,
S. |
|
|
|
|
Converting
to a tertiary amine ups sweetening capacity at an Iranian gas
facility |
|
Jan-08 |
|
|
|
|
|
|
Amkreutz, Rachel J.P. |
|
|
|
|
Proven-in-use' criteria for safety instrumented systems |
|
Nov-04 |
|
|
Safety integrity level verification-A PFD average calculation is not enough |
|
Oct-01 |
|
|
|
|
|
|
Amoroso, Andrea |
|
|
|
|
Improved scrubbing methods control pollutants from FCCUs |
|
May-05 |
|
|
|
|
|
|
Ananthakrishna, Shankar |
|
|
|
|
Cost-effective emissions reductions through leak detection, repair |
|
May-02 |
|
|
|
|
|
|
Andersen, D. C. |
|
|
|
|
Excellence – the key to success in the changing lube basestock manufacturing industry |
|
Aug-99 |
|
|
|
|
|
|
Anderson, Louis R. (Bob) |
|
|
|
|
Fine-tune FCC operations for changing fuels market |
|
Sep-05 |
|
|
|
|
|
|
Anderson, M. |
|
|
|
|
Analyze trace sulfur compounds in hydrocarbon gas streams |
|
Apr-97 |
|
|
|
|
|
|
Anderson, R. |
|
|
|
|
Use proactive permitting to expand capacity |
|
Jul-96 |
|
|
|
|
|
|
Anderson, R.F. |
|
|
|
|
Total cost of ownership: getting past the 10% solution |
|
Jul-96 |
|
|
|
|
|
|
Anderson, Richard C. |
|
|
|
|
Rule-driven optimization boosts plant performance |
|
Oct-05 |
|
|
Critical situation management – avoiding the pitfalls |
|
Oct-02 |
|
|
|
|
|
|
Anderson, Stephen A. |
|
|
|
|
Applying and implementing risk-based inspection programs |
|
Jan-02 |
|
|
|
|
|
|
Anderthal, N.E. |
|
|
|
|
Pros and cons of using a PMC |
|
Aug-97 |
|
|
Manage consultants better |
|
Mar-97 |
|
|
|
|
|
|
Andia, Dan |
|
|
|
|
Project practices for success |
|
Dec-98 |
|
|
|
|
|
|
Andrepont, John S. |
|
|
|
|
Boost gas turbine performance by inlet air cooling |
|
Feb-04 |
|
|
|
|
|
|
Andrews, Steve |
|
|
|
|
Lower heat exchanger maintenance costs |
|
Mar-02 |
|
|
|
|
|
|
Angulo, Eduardo |
|
|
|
|
Burn liquid wastes efficiently |
|
Jan-99 |
|
|
|
|
|
|
Anwar,
Z. |
|
|
|
|
Online
transfer from an analog electronic control system to a modern DCS |
|
Mar-08 |
|
|
|
|
|
|
Anthony, D.B. |
|
|
|
|
Pollution prevention – a global perspective |
|
Nov-94 |
|
|
|
|
|
|
Anxue, Li |
|
|
|
|
New methodology enhances planning for refined products |
|
Oct-03 |
|
|
|
|
|
|
Arakawa, Steven T. |
|
|
|
|
Increase productivity with novel reactor design |
|
Mar-98 |
|
|
|
|
|
|
Armstrong,
D. |
|
|
|
|
Maintaining
instruments used to determine biodiesel quality |
|
Aug-07 |
|
|
|
|
|
|
Armstrong, Tim |
|
|
|
|
Improve sulfur recovery operations |
|
Nov-04 |
|
|
Optimize sour water treatment |
|
Jun-03 |
|
|
|
|
|
|
Aronen, Robert |
|
|
|
|
Improve
pump reliability with advanced composite wear rings |
|
May-08 |
|
|
Improving equipment reliability through e-learning |
|
Sep-01 |
|
|
|
|
|
|
Arrieta, Eduardo |
|
|
|
|
Parametric versus nonparametric models in MPC process identification |
|
Feb-00 |
|
|
|
|
|
|
Artusi, Néstor César |
|
|
|
|
Unified automation with digital plant architecture improves gas plant and gathering system operation |
|
Mar-05 |
|
|
|
|
|
|
Arzenheimer, M. |
|
|
|
|
Benefits of advanced process control maintenance |
|
Jan-95 |
|
|
|
|
|
|
Aseeri,
A. S. |
|
|
|
|
Reduce
greenhouse gas emissions and gain carbon credits |
|
Dec-07 |
|
|
|
|
|
|
Ashley, Mike |
|
|
|
|
Consider new technology to reduce development life cycles |
|
Apr-04 |
|
|
The ultimate 'clean' fuel – Gas-to-liquid products |
|
Feb-03 |
|
|
|
|
|
|
Asquith, Jim |
|
|
|
|
Are you handling sulfur safely? |
|
Jul-03 |
|
|
|
|
|
|
Asquith, R. J. |
|
|
|
|
Stop foaming on hydrotreater 'hot' separator |
|
Jun-99 |
|
|
|
|
|
|
Atkins, Kenneth E. |
|
|
|
|
Combine troubleshooting and continuous monitoring of dynamic data for critical machinery |
|
Aug-05 |
|
|
|
|
|
|
Atkinson, R. |
|
|
|
|
Stop foaming on hydrotreater 'hot' separator |
|
Jun-99 |
|
|
|
|
|
|
Au, Jennifer |
|
|
|
|
Optimize pour point control to save money |
|
Jan-01 |
|
|
|
|
|
|
Aubrey, D.C. |
|
|
|
|
Use performance indicators to improve forecasting |
|
Jul-95 |
|
|
|
|
|
|
Avidan, Amos |
|
|
|
|
Improved planning can optimize solutions to produce clean fuels |
|
Feb-01 |
|
|
|
|
|
|
Awad,
M. |
|
|
|
|
Fuzzy
approach for cascaded refrigeration synthesis |
|
Mar-08 |
|
|
|
|
|
|
Awwal, A. S. |
|
|
|
|
Examining EPC contracts |
|
May-99 |
|
|
|
|
|
|
Axelrud, Celso |
|
|
|
|
Model predictive control for nonlinear processes with varying dynamics |
|
Oct-04 |
|
|
|
|
|
|
Ay, Richard L. |
|
|
|
|
Revise storage tank inspections |
|
Oct-96 |
|
|
|
|
|
|
Ayers, James B. |
|
|
|
|
Business tools for technology transfer |
|
Feb-00 |
|
|
|
|
|
|
Ayral, Thomas E. |
|
|
|
|
Quantifying
the benefits of virtual plant modeling |
|
May-08 |
|
|
Plan
to improve plant reliability |
|
Nov-07 |
|
|
How
companies are complying with the Baker Report |
|
Nov-07 |
|
|
Quantifying
the ROI of an asset performance management program |
|
May-07 |
|
|
Critical situation management – avoiding the pitfalls |
|
Oct-02 |
|
|
Expert systems aid plant operations managers |
|
Nov-98 |
|
|
Manage fuel gas with an expert system |
|
Sep-96 |
|
|
|
|
|
|
Azevedo, Fabio |
|
|
|
|
Re-invent fluid catalytic cracking |
|
Sep-04 |
|
|
|
|
| Back to Top |
|
|
|
|
