<%@ LANGUAGE=VBScript %> <% Option Explicit %> <% bConfidential = True iPublication = 24 %>

cumulative index: 1994 – present

Author:  A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q-R | S | T | U-V | W | X-Y-Z Subject:  A | B | C | D | E | F | G | H I | K | L | M | N | O | P | R | S | T | U | V | W

	– P –			Date
	Pacalowska, B.
		Improve hydrogen recovery from refinery offgases		Nov-96
	Pack, D.J.
		Unwanted sulfur contamination in natural gas		Jul-07
	Page, E.A.
		Improve predictive maintenance with HFE monitoring		Jan-94
	Paine, Robert J.
		Can optical remote sensing techniques detect air contaminants?		Jan-98
	Paisie, J. E.
		Develop optimal asset utilization		Sep-97
	Paisie, John E.
		When to buy spare parts		Jan-98
		Reduce turnaround costs		Jan-97
	Pallandt, J.
		Anatomy of a capacity increase, maintenance project for an ethylene unit		Jul-01
	Palmer, R. E. (Ed )
		Review fundamentals when retrofitting for ULSD		Feb-04
		Use an integrated approach to product in-line blending		Feb-95
	Paluh, J.H.
		Metallic flexible coupling service life and failure modes		Jan-97
	Pang, K.H.
		Optimize a licensor’s design using pinch technology		May-96
	Pankoff, Sr., Jack A.
		Improve and sustain process plant operator performance		Jul-05
		Look beyond traditional organizational structure		Jan-03
		Training today's process plant manager		Jun-00
		Training today's process plant operator		Aug-99
	Pantermuehl, P. J.
		Realistically assess reciprocating compressor foundation and mounting system loads		Aug-03
	Papa, G.
		Correlating throughput and backmixing in fluidized beds		Jan-95
	Papon, Jacques
		Model-based predictive control increases batch reactor production		May-05
	Paradies, Mark
		Using and justifying systematic root-cause analysis		Mar-03
	Park, N.S.
		Reduce revamp costs by optimizing design and operations		Apr-07
	Park, Sunwon
		Consider the generalized IMC-PID method for PID controller tuning of time-delay processes		Jan-06
	Parks, S.B.
		Improve alloy selection for ammonia furnaces		Oct-97
		Use alloys to improve ethylene production		Mar-96
	Park, Yong Woo
		Optimize ethylene fractionation train operations		Apr-08
	Parmentier, François
		Consider dynamic simulation for successful training		Jun-05
	Parvesse, Thomas
		What are the options to control VOC emissions?		Aug-00
	Pase, G.K.
		Use titanium tubes to create higher-capacity, corrosion-resistant exchangers		Oct-95
	Pate, Jr., A. R.
		Consider synthetic lubricants for process machinery		Jan-95
	Patel, Haresh
		Debottlenecking package refrigeration units		May-04
	Patel, Himanshu
		North American LNG terminals: Options?		Jul-05
	Patel, Kalpesh
		Multivariable step testing for MPC projects reduces crude unit testing time		Feb-06
	Patel, M. R.
		Improve steam turbine efficiency		Jun-00
	Patel, Nitin M.
		Insert flexibility into your hydrogen network – Part 2		Oct-05
		Insert flexibility into your hydrogen network – Part 1		Sep-05
	Patel, Rasik
		Upgrade your furnace for clean fuels		Sep-06
		Maximize ammonia production cost-effectively		Apr-06
	Patel, Sanjay
		Understand the difference between solid and serrated fins		Jul-06
		Optimizing O2 levels in fired heaters		May-06
		Simplify your thermal efficiency calculation		Jul-05
		Typical fired heater problems and root causes		Mar-07
	Patel, Vasant
		Consider new technology to produce 'clean' diesel		Feb-08
	Patrick, G. B.
		Reliable machines require competent maintenance skills		Jan-02
	Pawloski, Dr. John N.
		Use optical remote sensing techniques to monitor facility releases		Sep-98
	Paxtgon, G.E.
		Consider neural networks for process identification		Jun-95
	Payne, D.
		Multivariable controller increased MTBE complex capacity		Mar-97
	Payne, J. T.
		Cost of ownership resulting from field-based control		Jul-99
	Payne, John B.
		Case history: Fawley FCCU olefins project		Feb-04
	Pearch, Clyde
		A look at the new ISO 9000:2000		Apr-00
	Pearson, A. Thurlo
		Update on US biodiesel production		Feb-08
	Peeters, J.G.
		Consider membrane technologies to treat oily wastewater		Nov-00
	Pelham, R.
		Refinery operations and control: a future vision		Jul-96
	Pelin, Jean
		ACHEMA 2000 perspective: France		Mar-00
	Peluso, Marcos
		Fieldbus enables single-loop integrity with control-in-the-field		Oct-06
	Peng, Aw Kah
		ACHEMA 2006 and beyond: Singapore		May-06
	Peng, Liang-Chuan
		Hazardous situations created by improper piping analyses		Aug-03
		Thermal insulation and pipe stress		May-98
	Peng, Tsen-Loong (Alvin)
		Thermal insulation and pipe stress		May-98
	Penning, Richard T.
		Petroleum refining: a look at the future		Feb-01
	Pennino, Laura M.
		Issues and crisis communications management		Nov-06
	Pennock, James O.
		Plant design team: Think outside the box		Dec-03
	Perego, C.
		New developments in renewable fuels offer more choices		Sep-07
	Perez, Arturo Garcia
		ACHEMA 1997 Perspective: Mexico		May-97
	Pérez, Mayela
		Combine temperature surveys, field tests and gamma scans for effective troubleshooting		Apr-03
	Perez, Robert X.
		Simplified method monitors pump performance		Aug-02
	Perez-Arellano, Alfonso
		Roadmap for Mexico’s clean fuels program		Feb-06
	Perino, J.O.
		Process model-based multivariable control alternatives		Sep-94
	Perkins, Dave
		Duplex versus triplex architectures for process control systems		Jun-03
	Perry, Wayne
		Variable-speed drives lower compressed air costs		Jul-02
	Persad, Wesley
		Consider dynamic simulation tools when planning new plant startup		Oct-03
	Persi, Fred M.
		Comparing historical and laser scan surveys to identify discrepancies		Jul-06
	Peterson, F. M.
		What are the consequences of low oil prices?		Feb-99
		ACHEMA 1994 perspective: What's ahead for propylene supply?		May-94
	Peterson, K.
		Improve compressor containment with dry-gas seals		Dec-99
	Peterson, T.J.
		Multivariable controller increased MTBE complex capacity		Mar-97
	Petitjean, Emmanuelle
		The fouling limit in crude oil preheat train retrofits		Jul-05
	Petri, John A.
		Increase productivity with novel reactor design		Mar-98
	Petroleum Environmental Research Forum (PERF)
		New refinery stream profiles available		Aug-97
	Pfile, Martyn E.
		Consider improved liquid alkylation catalysts		Feb-01
	Pharris, C.
		Refinery operations and control: a future vision		Jul-96
	Philley, Jack
		Is 'junk science' invading accident prevention programs?		May-06
	Phillips, Jeffrey N.
		Gas turbine fuel nozzle refurbishment		Jan-04
	Picciotti, Marcello
		ACHEMA 2006 and beyond: Petrochemicals – today and tomorrow in developing countries		May-06
	Pierce, D.
		Rethink column internals for improved product separation		May-07
	Pigeon, D.
		Consider using micro-distillation technology for process control		Feb-08
	Pike, W.G.
		Optimize project execution, Part 2		Feb-94
		Optimize project execution, Part 1		Jan-94
	Pinto, Ricardo Duarte
		Combine temperature surveys, field tests and gamma scans for effective troubleshooting		Apr-03
	Pipenger, Gary G.
		How to 'spec' diesel fuel additives for winterization		Nov-01
		Making ‘premium’ diesel fuel		Feb-97
	Piper, Charlie
		From fieldbus to .NET: an overview of today?s network-based automation technologies		Mar-04
	Pipitone, Tony
		Improve safety systems with redundant networks		Oct-00
	Plantenga, Frans L.
		Process ultra-low sulfur diesel		Feb-01
	Poe, B.
		Optimize ammonia plant operation		Jun-99
	Pohlmann, André
		Improve startup of an olefins complex		Jun-00
	Polaud, Marc
		ACHEMA 2006 and beyond: France		May-06
		ACHEMA 2003 Perspective: France		May-03
	Pollard, Jim W.
		Burn liquid wastes efficiently		Jan-99
	Polley, Graham T.
		The fouling limit in crude oil preheat train retrofits		Jul-05
	Pompa, V. A.
		Real world experiences implementing refinery expert systems		Nov-99
	Ponzi, Peter R.
		Fine-tune operations through computational fluid dynamics		Jun-05
	Pope, David A.
		Modular project constructed in Southeast Asia		Mar-98
	Pordal, H.S.
		Computational fluid dynamics: a key analytical tool		Aug-01
	Porter, L.
		Integrate HSE concepts in facility designs		Dec-07
	Porfirio, C. R.
		First-principles distillation inference models for product quality prediction		Feb-02
	Post, Robert L.
		HAZROP: an approach to combining HAZOP and RCM		May-01
	Potter, D.
		Online analysis for amine-based tail gas treating units		Jan-08
	Pouly, Frederic
		Monitoring wastewater with UV spectrophotometry		Jan-01
	Pourteau, M.
		Future consumption of thermoplastics		Apr-97
	Pouwels, A.C.
		Fluid catalytic cracking—a diesel producing machine		Feb-08
	Powell, R. T.
		Develop LP models using a steady-state simulator		Jun-97
	Power, Barry F.
		Secondary containment liners for tank farms: a new approach		May-00
	Power, Mike
		Optimize gas-phase polyethylene		Mar-98
	Pradhan, S.
		Maintenance strategies for greater availability		Jan-94
	Pradhan, Shiraz A.
		Reliability driven asset management strategy for reciprocating compressors		Aug-05
		Bearing endurance and reliability – a user's perspective		Dec-04
	Pramanik, Tapash
		Biodiesel: clean fuel of the future		Feb-05
	Prasad, B. G. Shiva
		Reduce compressed air costs		Dec-00
	Prebo, B.
		Update on US biodiesel production		Feb-08
	Premalatha, M.
		Improve piping design		May-96
	Price, Bernie M.
		Achieving world-class operating performance		Jan-05
		Should you change to contract maintenance and operations?		Apr-02
		Consider compressor upgrade options		Jan-01
	Price, Brian C.
		Optimize energy consumption for LNG vaporization		Jan-06
		Optimize energy integration for LNG terminals		Jul-04
		Small-scale LNG facility development		Jan-03
	Price, D.E.
		Improve RCRA corrective actions		Aug-95
	Price, J.
		Clean amine solvents economically and online		Aug-95
	Prickett, Richard D.
		Retrofit your ethylene unit: the Chevron experience		Mar-98
	Primdahl, I.I.
		Improve syngas production using autothermal reforming		Mar-94
	Prior, D.
		Ethylene plant closed-loop optimization		Jun-00
	Pu, Jianing
		Selective withdrawal flows from storage tanks		Mar-06
	Puigjaner, Luis
		Discover a powerful tool for scheduling in ERM systems		Mar-01
	Pullarcot, S.K.
		Defect analysis of an ammonia storage tank		Apr-07
	Punitha, G.
		Improve piping design		May-96
	Putek, StanisBaw
		Resid hydrocracker produces low-sulfur diesel from difficult feeds		May-06
Back to Top