| cumulative index: 1994 – present |
|
|
Author: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q-R | S | T | U-V | W | X-Y-Z Subject: A | B | C | D | E | F | G | H I | K | L | M | N | O | P | R | S | T | U | V | W |
| Nitrogen and its Compounds | Date | ||
| Advanced Process Control and Information Systems Handbook This handbook-type industry reference source is produced biennially by the staff of Hydrocarbon Processing magazine. Licensors have provided flow diagrams and descriptions of major process control and information systems technologies. It is unique in that it shows how these technologies are applied to specific HPI processes and plants. The Handbook has become the user reference when implementing these advanced control and information system projects in the hydrocarbon processing industry (HPI). |
|||
|
Advanced Process Control and Information Systems 1995 |
Sep-95 | ||
|
Advanced Process Control and Information Systems 1997 |
Sep-97 | ||
|
Advanced Process Control and Information Systems 1999 |
Sep-99 | ||
| Sep-01 | |||
| Oct-03 | |||
| Oct-05 | |||
Consider CFD modeling to improve reactor design for synthesis gas production Advancements in computational fluid methods simulate dynamics and reactions for autothermal reformers |
Jan-05 |
||
Consider cryogenic methods to improve ammonia production New technologies enable reducing the size of primary reformer and lowering energy consumption |
Oct-01 |
||
Consider dual independent expander refrigeration for LNG production New methodology may enable reducing cost to produce stranded gas |
Jan-04 |
||
Consider onsite gas supply to meet processing needs By outsourcing industrial gas sources, refiners can focus resources – capital and manpower – on upgrading crude oil into higher-value products |
Feb-03 |
||
Consider SCR to mitigate NOx emissions Integrated H2 production with a stationary gas turbine yields processing gases, steam and electricity while complying with stringent air-emission requirements of a nonattainment area |
Nov-03 |
||
Control corrosion factors in ammonia and urea plant Processing conditions for ammonia and urea are highly corrosive; using metallurgical advancements can mitigate such forces |
Jan-01 |
||
Control microbial growth in your cooling water Proper monitoring and chemical dosing can alleviate this challenge |
May-04 |
||
Control refinery NOX emissions cost-effectively Refiner uses new ultra low-NOx burner technology to control emission levels from major sources |
Nov-01 |
||
Control refinery NOx with SCRs Installing new technology provided this refiner with more flexibility with fuel gas and reduced total plant emissions |
Nov-04 |
||
Convert oil sands into distillate cost-effectively New hydrocracking methods upgrades bitumen into low-sulfur naphtha |
Jan-06 |
||
Developments in the ammonia process To meet rising demand, producers seek methods to conserve energy and increase plant efficiencies |
Jul-01 |
||
Effect of heat stable salts on MDEA solution corrosivity, Part 1 New testing gives recommended limits of each species and the impact of temperature and pH |
Mar-96 |
||
Environmental Processes Handbook This handbook-type industry reference source features emerging remedial processes handling air, water and solid HPI waste streams. Each 'clean' process technology description includes flow diagram as well as application, operations, waste definitions, regulatory applications, economics and licensor information. |
|||
|
Environmental Processes '93 |
Aug-93 | ||
|
Environmental Processes '94 |
Aug-94 | ||
|
Environmental Processes '96 |
Aug-96 | ||
|
Environmental Processes '98 |
Aug-98 | ||
Fine-tune SCR operations Improving the quality of aqueous ammonia can reduce maintenance and raise reliability for pollutant-abatement system |
Jan-05 |
||
Gas Processes Handbook This handbook-type industry reference source features the latest commercially viable gas processing processes categorized by process function. It contains flow diagrams and descriptions of commercially viable gas processing processes from licensors. Included are drying, treating, contaminant removal, cleanup, hydrogen, liquefied natural gas, syngas, sulfur, gas-to-liquids, etc. Each process description includes a full color flow diagram as well as application, operation, economic, yield and licensor information. The processes are indexed by process and contributing company. |
|||
|
Gas Processes '94 |
Apr-94 | ||
|
Gas Processes ’96 |
Apr-96 | ||
| Apr-98 | |||
|
Gas Processes 2000 |
Apr-00 | ||
| May-02 | |||
| Feb-04 | |||
| Jan-06 | |||
Gas Processes Handbook 2006 Overview of licensors and selected process descriptions |
Jan-06 |
||
HPI Construction Boxscore Published three times a year and used for years by engineers, contractors, and marketing personnel to identify active construction projects around the world for sales information, market research, and planning. Data includes project type, plant capacity, geographic area, operating company, engineering company, construction company, licensor. |
|||
|
HPI Construction Boxscore Update, February '94 |
Feb-94 | ||
|
HPI Construction Boxscore Update, June '94 |
Jun-94 | ||
|
HPI
Construction Boxscore, October '94 |
Oct-94 | ||
|
HPI Construction Boxscore Update, February '95 |
Feb-95 | ||
|
HPI Construction Boxscore Update, June '95 |
Jun-95 | ||
|
HPI
Construction Boxscore, October '95 |
Oct-95 | ||
|
HPI Construction Boxscore Update, February '96 |
Feb-96 | ||
|
HPI Construction Boxscore Update, June '96 |
Jun-96 | ||
|
HPI
Construction Boxscore, October '96 |
Oct-96 | ||
|
HPI Construction Boxscore Update, February '97 |
Feb-97 | ||
|
HPI Construction Boxscore Update, June '97 |
Jun-97 |
||
|
HPI
Construction Boxscore, October '97 |
Oct-97 | ||
|
HPI Construction Boxscore Update, February '98 |
Feb-98 | ||
|
HPI Construction Boxscore Update, June '98 |
Jun-98 | ||
|
HPI
Construction Boxscore, October '98 |
Oct-98 | ||
|
HPI Construction Boxscore Update, February '99 |
Feb-99 | ||
|
HPI Construction Boxscore Update, June '99 |
Jun-99 | ||
|
HPI
Construction Boxscore, October '99 |
Oct-99 | ||
|
HPI Construction Boxscore Update, February '00 |
Feb-00 | ||
|
HPI Construction Boxscore Update, June '00 |
Jun-00 | ||
|
HPI
Construction Boxscore, October '00 |
Oct-00 | ||
|
HPI Construction Boxscore Update, February '01 |
Feb-01 | ||
|
HPI Construction Boxscore Update, June '01 |
Jun-01 | ||
|
HPI
Construction Boxscore, October '01 |
Oct-01 | ||
|
HPI Construction Boxscore Update, February '02 |
Feb-02 | ||
|
HPI Construction Boxscore Update, June '02 |
Jun-02 | ||
|
HPI
Construction Boxscore, October '02 |
Oct-02 | ||
|
HPI Construction Boxscore Update, February '03 |
Feb-03 | ||
|
HPI Construction Boxscore Update, June '03 |
Jun-03 | ||
|
HPI
Construction Boxscore, October '03 |
Oct-03 | ||
|
HPI Construction Boxscore Update, February '04 |
Feb-04 | ||
|
HPI Construction Boxscore Update, June '04 |
Jun-04 | ||
|
HPI
Construction Boxscore, October '04 |
Oct-04 | ||
|
HPI Construction Boxscore Update, February '05 |
Feb-05 | ||
|
HPI Construction Boxscore Update, June '05 |
Jun-05 | ||
|
HPI Construction Boxscore, October '05 |
Oct-05 | ||
Improve CO2 removal from ammonia plants New developments raise the profitability and reliability for existing and grassroots units |
Aug-05 |
||
Improve monomer recovery from polyolefin resin degassing Case histories highlight how to recover and recycle ethylene and propylene from polymer waste-gas streams |
Mar-96 |
||
Improve syngas production using autothermal reforming Flexible process design uses partial oxidation and adiabatic-steam reforming to cut costs |
Mar-94 |
||
Improve urea reactor efficiency Performance term enables comparing varying process designs using a common set of operating parameters |
Apr-98 |
||
Laser scanning solutions secure accurate dimensional data This engineering and construction planning tool can reduce schedules, overall costs and exposure to potentially hazardous onsite environments |
Dec-05 |
||
Minimize NOx emissions cost-effectively Use this tutorial to evaluate available control technologies and install exactly what you need for current and future NOx reductions |
Jun-01 |
||
Mitigate NOx by steam injection An existing steam-methane reformer increases its capacity and avoids an extensive re-permitting process |
Feb-98 |
||
Optimize ammonia production Depending on plant capacity, typical paybacks are four to seven months |
Jul-99 |
||
Optimize FCC flue-gas emission control – Part 1 Upcoming environmental regulations will require tighter control measures for FCC units. So, what are the best options? |
Sep-02 |
||
Optimize FCC flue-gas emission control – Part 2 Regenerator design plays a crucial role when limiting NOx emissions |
Oct-02 |
||
Optimize phenol production By using new technologies for intermediate feedstocks, polycarbonate producers can improve manufacturing-chain costs |
Dec-05 |
||
Optimize process operation with new vacuum distillation methods Advanced fluid dynamics modeling fine-tunes vacuum separations that improve products’ qualities and increase unit reliability |
May-05 |
||
Optimize sour water treatment This checklist details several common problems and the workarounds to correct them |
Jun-03 |
||
Petrochemical Processes Handbook Handbook-type industry reference source, features the latest technological developments and advancements . Each including flow diagram and application, description, operation, economic, yield and licensor information. Processing innovations encompass high-activity catalyst systems, value-added end products, higher product purities, higher yields, energy-conservation methods, byproduct reduction, etc.. Included are commercially viable processes ranging from alkylbenzene to xyleneisomers. |
|||
|
Petrochemical Processes ’95 |
Mar-95 | ||
|
Petrochemical Processes ’97 |
Mar-97 | ||
|
Petrochemical Processes ’99 |
Mar-99 | ||
| Mar-01 | |||
| Mar-03 | |||
| Mar-05 | |||
Predict contaminant concentrations in deaerator-vent emissions Here is a tool to estimate maximum concentrations of contaminants in hydrogen-plant condensate |
Jun-01 |
||
Prevent adsorber bed failure Improved operational integrity minimizes plant upsets and challenges |
Sep-02 |
||
Process design and optimization ’96 Report describes process simulation technology for specific applications. Included are process names, diagrams, applications, descriptions, objectives, economics, installations, licensors and a complete list of process submissions |
Jun-96 |
||
Process simulation and design '94 This first-of-a-kind report describes today's process simulation and design technology for specific applications. It includes process names, diagrams, applications, descriptions, objectives, economics, installations, licensors, and a complete list of process submissions |
Jun-94 |
||
Reduce methanol manufacturing costs Better management of syngas-supply expenses minimizes profitability risks for this commodity petrochemical |
Mar-00 |
||
Refining Processes Handbook Handbook-type industry reference source has been expanded this year. It contains flow diagrams and descriptions of leading-edge, licensed refining technologies. Specific processing operations include coking, hydrotreating, hydrocracking, fluid catalytic cracking, resid catalytic cracking, alkylation, catalytic reforming, ethers and more. Licensors contributed process flow diagrams, products, process descriptions, economics, installations and other vital information. The flow diagrams and summary descriptions define typical licensed processes used by modern refineries. |
|||
|
Refining Processes ’94 |
Nov-94 | ||
|
Refining Processes '96 |
Nov-96 | ||
| Nov-98 | |||
| Nov-00 | |||
| Nov-02 | |||
| Sep-04 | |||
Use monitoring programs to improve ammonia plant uptime Trending processing information – pressure, temperature – provides 'clues' on the reliability of critical equipment and catalysts |
Feb-00 |
||
| Back to Top | |||