Valves
New state-of-the-art in sulfur recovery?—Part 2: Environmental benefits
It is widely accepted that state-of-the-art sulfur recovery technologies utilize the modified Claus process as well as some extension technology on the tail gas.
Hot oil pump warm-up system best practices and failure case study
Many industries utilize pumps in hot applications, including oil and gas facilities.
2022 HP Awards Finalists
<em>Hydrocarbon Processing</em>, the downstream processing sector’s leading technical publication for 100 yr, has announced the finalists for its sixth annual <em>HP</em> Awards, which celebrate innovative technologies and people that have been instrumental in improving facility operations over the past year.
Choosing the proper regulator configuration can reduce droop
Many factors go into selecting the proper regulator for your system. One of those factors is sensitivity to changes in outlet pressure as downstream flow fluctuates, which is often characterized as “droop” as illustrated within a regulator’s flow curve.
HRSG water/steam sampling: Do it right or face potential consequences
Many large industrial facilities—including refineries, and chemical and petrochemical plants—are increasingly turning to co-generation for process steam and power production.
The effects of highly corrosive fluids on valves and disasters that can be avoided
Some of the highly corrosive fluids in the oil and gas industry contain the following compounds: carbon dioxide, hydrogen sulfide, chlorides and moisture.
Fouling in hydrogen recycle gas compressors
Hydrogen recycle gas compressors are one of the most significant rotating equipment in oil refineries, petrochemical plants and upgraders.
Use a simple vapor equation for sizing two-phase pressure relief valves
Pressure relief valves (PRVs) protect process equipment from the hazards of excessive over-pressure.
Innovations
The Thermo Scientific Delta Q isotope ratio mass spectrometer (IRMS) is a next-generation gas IRMS designed to enable detailed analysis with greater precision and accuracy.
Valves, Pumps and Turbomachinery: Achieving the right installation torque with a virtual calculation
Determining the required installation torque for a tight flange system is a daily challenge for industrial valve manufacturers and plant operators.
- TES partners with 7 large international companies to create a global e-NG coalition 3/18
- Colombia cops seize 7.3-MM gallons of crude in raids on illegal refineries 3/18
- bp's Indiana (U.S.) refinery back to normal operations after Feb outage 3/18
- HIF Global, Idemitsu Kosan and MOL co-operate to develop eFuels supply chain 3/18
- Iraq to curb oil exports to compensate for overproduction 3/18
- Belgian government delays export fuel quality legislation 3/18