Bapat, S. V.
Sanjay V. Bapat is a process engineering manager at Petrokon Utama Sdn Bhd in Brunei. He has worked for 25 years in the process engineering of chemical, petrochemical, fertilizer, and oil and gas projects. He is a Fellow of IChemE, a chartered engineer and a Brunei Shell Petroleum-approved Level 2 technical authority. He is responsible for delivering front-end, conceptual design and detailed design deliverables, along with assurances of compliance with process safety requirements.Mr. Bapat develops concepts and methodologies and strategizes design condition selection, hazardous area classification, flare and blowdown studies, consequence modeling and surge analysis studies. He has presented papers at IChemE’s Third Hazards AP symposium and the Brunei International Conference on Engineering and Technology. He holds a postgraduate degree in chemical engineering.
Consider post-design changes to confine a hazardous area
Hazardous area classification (HAC) is carried out while performing basic design engineering, and HAC drawings are produced as one of the deliverables.
- 1
- ... 1 pages
- Jet fuel demand growth lags as air traffic exceeds pre-pandemic level 4/19
- Jet2.com to use SAF at London Stansted Airport 4/19
- Neste and New Jersey Natural Gas target reducing greenhouse gas emissions with Neste MY Renewable Diesel 4/19
- Cepsa and Evos join up for green methanol storage in Spain and the Netherlands 4/19
- Russia's Bashneft oil company installs anti-drone nets to protect refineries 4/19
- Hapag-Lloyd and Seaspan to retrofit five vessels to methanol propulsion 4/19
