August 2004

Special Report: Fluid Flow and Rotating Equipment

Consider regenerative pumps for low-flow/low-NPSH applications

In low-flow applications they use less horsepower when 'curve run-out' is considered

Muller, S., Stepehns Mechanical Associates

The steady state nonpulsating flow patterns produced by both high-speed volute-type and standard-speed regenerative-type (regenerative turbine) centrifugal pumps are similar. Ease of maintenance and flow control give both of these centrifugal pump types certain advantages over the admittedly more efficient high-head, low-flow positive displacement pumps. Of course, the latter are known to exhibit pulsating pressure and flow characteristics. Notable exceptions notwithstanding, centrifugal pumps thus offer overall advantages that offset their reduced efficiencies at what are generally understood to represent low flowrates, i.e., rates below about 50 gpm. However, when selecting centrifug

Log in to view this article.

Not Yet A Subscriber? Here are Your Options.

1) Start a FREE TRIAL SUBSCRIPTION and gain access to all articles in the current issue of Hydrocarbon Processing magazine.

2) SUBSCRIBE to Hydrocarbon Processing magazine in print or digital format and gain ACCESS to the current issue as well as to 3 articles from the HP archives per month. $399 for an annual subscription*.

3) Start a FULL ACCESS PLAN SUBSCRIPTION and regain ACCESS to this article, the current issue, all past issues in the HP Archive, the HP Process Handbooks, HP Market Data, and more. $1,995 for an annual subscription.  For information about group rates or multi-year terms, contact J'Nette Davis-Nichols at Jnette.Davis-Nichols@GulfEnergyInfo.com or +1 713.520.4426*.

*Access will be granted the next business day.

Related Articles

From the Archive

Comments

Comments

{{ error }}
{{ comment.comment.Name }} • {{ comment.timeAgo }}
{{ comment.comment.Text }}