Furnaces
FTO: An enabling emission control technology for petrochemical plant expansions
For the petrochemical industry, the U.S. Gulf Coast (USGC) has the locational advantage of proximity to cheap feedstock, and to an abundance of pipeline infrastructure and terminals for export markets.
Hydrocarbon Processing 2020 Awards WINNERS
<i>Hydrocarbon Processing</i>, the downstream processing sector’s leading technical publication, has announced the winners for its third annual awards.
Hydrocarbon Processing Awards 2020—FINALISTS
This special section details all finalists within each category for the fourth annual <ital>HP</ital> Awards. The winners will be announced on Oct. 1.
Base layer enhancement study for crude oil distillation process
Base layer control is one of the most important stages of a process control system hierarchy for refinery applications.
Steam generator in a hydrocracker high-pressure loop—why not?
Historically, there has been a perception in the industry that it is not safe to include a steam generator in the high-pressure loop of a hydrocracker.
Inspection: Establish an inspection plan for flare burners
Flares are prominent in hydrocarbon processing operations. From afar, they can be spotted burning with a high or low flame, supported by a tall steel structure
Use CFD modeling to improve burner design and operation
Process heaters are essential pieces of equipment in the refining and petrochemical industry that are used to heat hydrocarbons to a desired temperature.
Alternatives to ladders and platforms for inspection and maintenance of elevated flare tips
Flare systems are used in refineries and chemical plants as a last line of defense for the plant by burning all unwanted gases and liquid during any upset or emergency condition.
Cost-effective naphtha hydrotreating unit revamp to increase high-octane reformate production
India, which is the third-largest economy in the world, is home to nearly 18% of the world’s population (nearly 1.4 B).
Apply ceramic coatings to extend radiant tube life in process heaters
Process tubes in refining applications are typically steel alloy (ASTM A335 P22, P5 or P9), which contain 2.25%, 5% and 9% Cr, respectively. These grades oxidize at operating temperatures, and scale will grow continuously on the surface, often reaching 2 mm in thickness in higher-temperature/high-heat-flux units. The layers of scale are very insulating and represent a significant barrier to conductive heat transfer to the process.
- KBR's phenol technology selected by SABIC Fujian Petrochemicals 4/25
- Honeywell Technology helping to produce SAF with lower cost and waste 4/25
- Nigeria's NNPC partners local firm on new 100,000 bpd refinery 4/25
- Stranded cargo shows credit challenges at Nigeria's Dangote refinery 4/25
- Low U.S. distillate consumption reflects slow economic activity and biofuel substitution 4/25
- Clariant catalysts reduce customers’ footprints by 40 million tons of CO2e in 2023 4/25
