Heat Transfer
Editorial Comment: Maintenance and reliability—A cornerstone of safe and efficient plant operation
Refineries and petrochemical plants are comprised of a series of crucial processes to produce transportation fuels, products and chemicals demanded by the global market. These processes consist of capital-intensive units that must be maintained to provide reliable performance. Failure to adequately maintain these assets can have a detrimental effect to not only operations and profit, but also to worker safety.
Determining the indeterminate
Standards such as API, ASME and NFPA are applied widely in the refining industry.
Converting a petroleum diesel refinery for renewable diesel
As refiners consider renewable, low-carbon alternatives, renewable diesel—refined from agricultural products using petroleum refinery processes—is gaining traction.
The use of tube inserts in fired heaters
In 1896, Whitham<sup>1</sup> reported the successful use of twisted tapes (originally called retarders, and now also called turbulators) to increase heat transfer in boiler fire tubes—their effectiveness in increasing heat transfer is well known.
Getting the most out of your process burner tiles
It is often incorrectly assumed that the burner tile is simply a piece of refractory or firebrick. Nothing could be further from the truth.
Specifying internals in sour water strippers—Part 1
A sour water stripper (SWS) system is a common process in petroleum refineries and other processes where hydrogen sulfide is present.
Optimizing for viability—VDU revamp in a brownfield project
Revamping an existing column in an operating plant for higher throughput is a challenge, especially when the column is already operating at its rated capacity.
Stop oxidation and scale growth with high-emissivity coating
Oxidation of external tube surfaces is responsible for metal loss at around 0.25 mm/yr, which limits tube life.
Selection and comparison of thermic fluids in a fired heater
Hot oil, also called thermic fluid, is a heat transfer fluid (HTF) used in oil refineries and chemical plants.
How to support condition monitoring with wireless instrumentation networks
When <i>Wireless</i>HART first hit the market in 2008, most of the native devices using it were process measurement instruments.
- Renewable fuels project in Canada begins production 4/19
- Jet fuel demand growth lags as air traffic exceeds pre-pandemic level 4/19
- Jet2.com to use SAF at London Stansted Airport 4/19
- Neste and New Jersey Natural Gas target reducing greenhouse gas emissions with Neste MY Renewable Diesel 4/19
- Cepsa and Evos join up for green methanol storage in Spain and the Netherlands 4/19
- Russia's Bashneft oil company installs anti-drone nets to protect refineries 4/19
