Hydrotreating
Industry Perspectives: Secondary unit construction surges in the near term
Although the refining industry is expected to add more than 7 MMbpd of new distillation capacity by the early 2020s, the global refining industry will witness a boost in secondary processing capacity, as well.
Editorial Comment: The future of refining—sulfur need not apply
According to multiple industry reports, crude oil consumption will continue to increase over the short term.
Upgrading the bottom of the barrel
In the past few decades, new technologies, including both carbon rejection methods and catalytic conversion methods, have emerged.
Metallurgy solution to prevent polythionic acid stress corrosion cracking in hydroprocessing
Hydrotreating is a staple process found in nearly every refinery. The process removes undesirable feed contaminants, such as sulfur, nitrogen and metals, and saturates olefins and/or aromatics to produce high-quality products.
Consider pitot tube pumps for low-flow, high-head applications
Low-flow, high-head pumping requirements in refining and petrochemical plants make up less than 2% of the total pump population. This minor percentage is creating significant reliability concerns, which result in low mean-time between failures (MTBF), as well as high maintenance costs.
Production of renewable fuels in existing refinery assets: A cost-effective coprocessing strategy
Vegetable oils are a renewable biomass resource used in the production of biofuels. Biodiesel production from transesterification of vegetable oils (fatty acid methyl ester, or FAME) is the primary route for producing biofuels from vegetable oils.
Details on high-impact refining and petrochemical projects presently under construction, as chosen by HP editors and readers
The global hydrocarbon processing industry (HPI) continues to expand and modernize to efficiently meet growing demand for energy, transportation fuels and petrochemicals.
Industry Perspectives: The latest in refining technology
Nearly 700 refineries are operating in more than 120 countries around the world.
Optimization: Filtration for processes inside refineries
Proper filtration is one of the most important functions performed inside refineries.
Optimize a refinery H2 network using spreadsheet tools
One of the major goals in every refining complex is to minimize the utilization of its hydrogen (H<sub>2</sub>) generation units by maximizing the H<sub>2</sub> recovery from residual streams.
- Neste strengthens chemical recycling logistics infrastructure in Europe with Tepsa Netherlands 10/4
- Enbridge sanctions pipelines to support bp's new deepwater U.S. Gulf of Mexico development 10/4
- Czechs seek partners to challenge EU's CO2 goals for car sector 10/4
- U.S. distillate fuel oil demand will increase in the fall due to agricultural harvest 10/4
- Woodside Energy: Fatality at Beaumont Clean Ammonia project 10/4
- StraightFlo™ reciprocating compressor valve provider rebrands as Atlas Copco 10/4
