Loss Prevention
Reliability: Thinking outside of the box
In late 1989, the Milwaukee Metropolitan Sewage District asked the author to present a three-day equipment maintenance course at one of its large effluent treatment facilities.
Analyze pressure loss during FCC standpipe catalyst transfer
The fluid catalytic cracking unit (FCCU) is the primary conversion equipment for modern refineries to obtain clean transportation fuels, along with high-grade petrochemical feedstock.
Is coating required on stainless-steel components?
Stainless steel is a generic term used for a large group of corrosion-resistant alloys containing at least 10.5% chromium (Cr), and possibly containing other alloying elements like nickel (Ni), molybdenum (Mo), manganese (Mn) and nitrogen (N).
Digital: Safety, simplicity and productivity provide the value needed in plant operations
In today’s manufacturing environment, process automation professionals must choose from a multitude of widgets and innovations to help their plants run more smoothly.
Risk mitigation procedure following criticality assessment and FMEA
In asset performance management (APM), criticality assessment and failure mode and effects analysis (FMEA) are powerful tools that enable the identification of opportunities to minimize asset lifecycle costs during the development of equipment strategies.
Process control reimagined
Imagine visiting the control room of a typical process unit at a refinery.
Separating from the competition: Recovering profits after the pandemic
As recovery from the COVID-19 pandemic begins, so will a return to normal life.
Good distributor design for high-velocity feed debottlenecks a crude preflash tower
Bazan Group’s crude unit No. 3—not designed by any of the authors’ companies—was bottlenecked by the preflash tower.
Vapor velocity guidelines for horizontal flare knockout drums
Flare knockout (KO) drums are important components of effluent handling systems.
Restaging/rerating of centrifugal compressors: Fundamentals, practices and challenges
The primary requirement for rerating or revamping an existing centrifugal compressor is to match the new operating requirements, such as increased or decreased flow, increased or decreased head, or a combination of both. Rerating or revamping is necessary where the existing compressor or compressor train is incapable of meeting the new operating requirement efficiently.
- Methanol-fueled "Ane Maersk" arrives at Port of Hamburg 3/29
- Russia's Novak says there's no need for diesel export ban 3/29
- NextChem Tech selected as engineering and technology partner for Aliplast’s upcycling plant project in Italy 3/29
- Russia's Ryazan oil refinery restores crude processing to 60% of pre-attack level 3/28
- Global refinery capacity totaling 3.6 MM bpd at high-risk of closure 3/28
- More than 20% of global oil refining capacity at risk, analysis finds 3/28