Process Optimization
New state-of-the-art in sulfur recovery?—Part 3: Economic benefits
Worley Comprimo and Topsoe have developed a new sulfur recovery processa that combines conventional Claus technology from Comprimo with the proven wet gas sulfuric acid (WSA) process from Topsoe.
Crude C4 alternatives for a successful grassroots petrochemicals project
The disposition of the crude C<sub>4</sub> stream from a steam cracker is a project configuration topic that deserves some discussion.
An advanced extractive distillation process for aromatics recovery
This article focuses on a novel extractive distillation (ED) process for recovering benzene, toluene and xylene (BTX) aromatics from a full-boiling-range pyrolysis gasoline or reformate feedstock—a process that has been commercially demonstrated and is ready for licensing or a JV.
Editorial Comment: Juggling the increasing global demand for thermoplastics vs. reducing their environmental
If you were to review any forecast for global thermoplastics demand to 2050—high-density polyethylene (PE), low-density PE, polypropylene, polyvinyl chloride and polyethylene terephthalate, among others—chances are that you will see a steady rise in consumption.
Inpex to use BASF-JGC Corp.'s CO2 capture technology for large-scale blue H2/ammonia project
Inpex plans to utilize BASF and JGC Corp.'s HiPact CO2 capture technology in its Kashiwazaki Clean Hydrogen/Ammonia project.
Methanex-Mitsui complete first net-zero voyage fueled by bio-methanol
Methanex Corporation and Mitsui O.S.K. Lines, Ltd. announced the dual-fuel vessel “Cajun Sun” successfully completed the first-ever net-zero voyage fueled by bio-methanol.
Shell Catalyst & Technologies to provide tech/catalysts for CSPC's Phase 3 project in China
Shell Catalyst & Technologies to provide tech/catalysts for CNOOC and Shell Petrochemicals Company Limited' Phase 3 project in China, which includes the construction of a 1.6-MMtpy cracker.
Axens launches Jetanol brand for its alcohol-to-jet fuel technology
Axens announced the launch of the Jetanol™ brand for its Alcohol-to-Jet technology.
Key considerations for the optimum design of a hot oil system
In the hydrocarbon processing industry, where direct heating is not possible, a heat transfer medium is used. Steam has traditionally been the preferred heating medium.
The production and maintenance KPIs modern process plants should use to measure success
Modern petrochemical processing facilities are blessed with overwhelming quantities of data, given the digital transformation taking place throughout the manufacturing industries.
- Renewable fuels project in Canada begins production 4/19
- Jet fuel demand growth lags as air traffic exceeds pre-pandemic level 4/19
- Jet2.com to use SAF at London Stansted Airport 4/19
- Neste and New Jersey Natural Gas target reducing greenhouse gas emissions with Neste MY Renewable Diesel 4/19
- Cepsa and Evos join up for green methanol storage in Spain and the Netherlands 4/19
- Russia's Bashneft oil company installs anti-drone nets to protect refineries 4/19
