Pumps
Preventing wire wooling journal bearing failure
This work details the operation of a 21,000-HP, five-stage barrel pump utilized for seawater injection service.
Upgrading the bottom of the barrel
In the past few decades, new technologies, including both carbon rejection methods and catalytic conversion methods, have emerged.
How the “LLF” condition monitoring technique can improve manufactured product profitability
Technological advances have allowed predictive maintenance (i.e., condition-based maintenance) to overtake preventive maintenance in plant operations. “Look, listen and feel (LLF)” is a condition monitoring technique that improves the reliability of equipment and machinery in manifolds.
Reliability: Include pump wear rings in your upgrade efforts
Most centrifugal pump designs include replaceable rotating wear rings on the impeller (impeller wear rings) and stationary wear rings inside the casing (case wear rings). Although pump wear rings are simple components, they can have profound impacts on pump reliability, efficiency and safety. These wear rings serve three purposes:
Consider pitot tube pumps for low-flow, high-head applications
Low-flow, high-head pumping requirements in refining and petrochemical plants make up less than 2% of the total pump population. This minor percentage is creating significant reliability concerns, which result in low mean-time between failures (MTBF), as well as high maintenance costs.
Advancing export terminal technology: An optimized process for the refrigeration of cryogenic hydrocarbons
Ethane production in North America (NA) has expanded dramatically with the onset of shale production and associated hydraulic fracturing. Ethane concentrations in fractured shale gas are typically 10% or higher vs. a traditional range of 4%–7% in associated gas.
Case histories of amine plant equipment corrosion problems–Part 2
Past corrosion incidents provide insight into the causes of corrosion and the preventive actions required to protect plant equipment and reduce costly plant downtime.
The design and construction of large crude oil storage tanks with double-deck floating roofs
As crude oil prices decline, consumption of petroleum fuels is increasing.
Reliability: Could a company be its own worst enemy?
In a recent conversation with a “pump veteran,” we explored his 33 yr of experience with pump original equipment manufacturers (OEMs) from 1984–1997 and with a widely known non-OEM (1997–2017).
Optimize operating parameters for C3 splitters to accommodate feed changes
In the oil and gas sector, fractionation is a vital part of every plant.
- Russia's Ryazan oil refinery restores crude processing to 60% of pre-attack level 3/28
- Global refinery capacity totaling 3.6 MM bpd at high-risk of closure 3/28
- More than 20% of global oil refining capacity at risk, analysis finds 3/28
- SABIC Fujian Petrochemicals advances major ethylene project with Lummus technologies and services 3/28
- Singapore fuel oil stockpiles slip to two-week low 3/28
- Sri Lanka minister says Sinopec to start work on refinery by June 3/28