April 2003

Special Report: Maintenance/Reliability

Consider multi-jackbolt tensioners

Benefits include improved safety and reduced cost and installation time

Steinbock, A., Superbolt, Inc.

Since the 1980s, multi-jackbolt tensioners (MJTs) have found widespread use on turbines, pumps, heat exchangers, piping, valves, reactor vessels and compressors. Their reliability in service, ease of application (versus other means) and relative low cost account for an increasing popularity. At first glance, MJTs may not always seem the cheaper alternative. On both new equipment and retrofits where cost of materials takes priority, these hexnut replacements typically cost more than standard nuts and bolts - up to a point. As size increases, the difference tends to diminish. In size ranges beginning with 1-in. and

Log in to view this article.

Not Yet A Subscriber? Here are Your Options.

1) Start a FREE TRIAL SUBSCRIPTION and gain access to all articles in the current issue of Hydrocarbon Processing magazine.

2) SUBSCRIBE to Hydrocarbon Processing magazine in print or digital format and gain ACCESS to the current issue as well as to 3 articles from the HP archives per month. $399 for an annual subscription*.

3) Start a FULL ACCESS PLAN SUBSCRIPTION and regain ACCESS to this article, the current issue, all past issues in the HP Archive, the HP Process Handbooks, HP Market Data, and more. $1,995 for an annual subscription.  For information about group rates or multi-year terms, contact J'Nette Davis-Nichols at Jnette.Davis-Nichols@GulfEnergyInfo.com or +1 713.520.4426*.

*Access will be granted the next business day.

Related Articles

From the Archive

Comments

Comments

{{ error }}
{{ comment.comment.Name }} • {{ comment.timeAgo }}
{{ comment.comment.Text }}