Rakib, M.
Mohammad Abdur Rakib is the Section Head for process modeling and simulation at the TAKREER Research Centre in Abu Dhabi. He also leads the operational excellence focus area for process modeling and LP modeling to establish and monitor best modeling practices in TAKREER. Dr. Rakib earned his PhD in chemical engineering from the University of British Columbia, Canada, specializing in the areas of fluidization and chemical reaction engineering, and an MS degree in chemical engineering in the area of computational fluid dynamics, from KFUPM, Saudi Arabia. His wide experience ranges from teaching in university to industrial R&D in both refining and petrochemicals. Previously, he worked at the SABIC T&I Centre in Riyadh, Saudi Arabia.
Simulation for the prevention of hydrates during FCC gas processing
In the last decade, maximizing refinery production of polymer-grade propylene (PGP) has gained importance due to high demand from the petrochemical industry.
- 1
- ... 1 pages
- Aspen Technology introduces new strategic planning for sustainability pathways solution 4/26
- Imperial Oil gets Q1 boost from higher production; refining throughput weighs 4/26
- KBR's phenol technology selected by SABIC Fujian Petrochemicals 4/25
- Honeywell Technology helping to produce SAF with lower cost and waste 4/25
- Nigeria's NNPC partners local firm on new 100,000 bpd refinery 4/25
- Stranded cargo shows credit challenges at Nigeria's Dangote refinery 4/25