August 2010

Here are the reasons and remedial actions

The goals were achieved by using alloys with superior corrosion resistance

It facilitates predicting compressor system performance

Upgrades substantially increased MTBR

Take a look at these environmental and economic paybacks

Better recovery definition of C3s and C4s from gas absorber/stripper can lower costs

In revamp projects, better energy integration provides more benefits with less capital investment and lower operating costs

Use these calculations for a specific tank calibration

The United Steelworkers Union (USW) issued a press release chastising the oil industry for the series of fires and explosions that keep happening at US refineries. USW pointed out that there has been ..

In April 2010, I followed Allan Kern’s automation reassessment editorial1 with a call to renew the practice of process control and IT in the HPI. Now I follow his thoughtful July 2010 editorial2 ..

In most small machines there is a need to limit both contaminant ingress and oil leakage. Inexpensive lip seals are sometimes used for sealing at the bearing housing, but lip seals typically last only..

Hydrocarbon Processing’s International Refining Conference (IRC) debuted June 21–23 in Rome, Italy. Hosted by eni, the event included a two-day, two-track technical conference as well as an ..

Enterprise Products Partners’ refined products storage facility in Port Arthur, Texas, which was built to support the expansion of a nearby refinery, has commenced commercial operations and recei..

• DNV-led consortium to conduct ammonia bunkering safety study in Singapore 1/26
• Taiwan's Formosa shuts hydrocracker following fire 1/26
• Nigeria to amend oil law to extend petrol subsidies 1/26
• Vietnam's Binh Son ups capacity, petrol firms boost imports amid shutdown fears 1/26
• U.S. crude, gasoline stocks build, even as fuel demand surges 1/26
• Maire Tecnimont awarded sizable EPC contract by Rosneft 1/26

• Most Read
• Most Commented