March 2014

Heat Transfer

Consider automation to check shell-and-tube heat exchanger design

This automated checklist tool can be used to quickly check the acceptability of your design configuration based on the various project, client and services requirements.

Shende, S., Technip

Plant operating experience over the years has led clients to be more demanding with regard to equipment design. This experience is expressed in client specifications, codes and standards. Heat exchanger design must meet requirements stipulated in: Equipment standards Design basis and client specifications applicable for the contract Use of specialty expertise available with the designer (best practices, etc.) Requirements from the process licensor. These requirements exist in addition to the basic requirements of heat transfer area and pressure drop. They are maintained by heat exchanger designers in the form of a checklist, and applied during design development. The checklist

Log in to view this article.

Not Yet A Subscriber? Here are Your Options.

1) Start a FREE TRIAL SUBSCRIPTION and gain access to all articles in the current issue of Hydrocarbon Processing magazine.

2) SUBSCRIBE to Hydrocarbon Processing magazine in print or digital format and gain IMMEDIATE ACCESS to the current issue as well as to 3 articles from the HP archives per month. $399 for an annual subscription.

3) Start a FULL ACCESS PLAN SUBSCRIPTION and regain IMMEDIATE ACCESS to this article, the current issue, all past issues in the HP Archive, the HP Process Handbooks, HP Market Data, and more. $1,695 for an annual subscription.  For information about group rates or multi-year terms, contact J'Nette Davis-Nichols at or +1 713.520.4426.

Related Articles

From the Archive