Environment & Safety Gas Processing/LNG Maintenance & Reliability Petrochemicals Process Control Process Optimization Project Management Refining

Catalysts

Hydrocarbon Processing Awards 2020—FINALISTS

This special section details all finalists within each category for the fourth annual <ital>HP</ital> Awards. The winners will be announced on Oct. 1.

Catalyst breakthrough for ethylene production

Clariant Catalysts: Vianna, C.  |  Adams, D.

In a growing and competitive industry, ethylene producers are turning to catalyst suppliers for solutions to innovate. Until recently, a solution to the difficulties inherent to acetylene hydrogenation in ethylene plants has challenged the catalyst industry. Due to their lower total production cost, “front-end” process flowsheets are now predominantly selected for new projects.

Driving FCCU value through fresh and flushing catalyst activity modeling

BASF: Shackleford, A.  |  Tan, A.  |  Eren, B.

Refiners are continually challenged to maximize economic gain in the face of cost pressures and plant operating constraints. The fluidized catalytic cracking unit (FCCU) plays an integral role in the optimization of the facility. FCC catalyst is often one of the largest budget items in the refinery. Therefore, the balance between FCCU performance and catalyst costs has a significant impact on refinery profitability.

Catalytic processes operation during downturns in aromatics complexes

ExxonMobil Chemical Co.: Andrews, J.  |  Hung, J.  |  Molinier, M.  |  Lim, Y. T.

Paraxylene production is a highly cyclical business that is subject to changes in the global economy and dependent on feedstock costs, alternative dispositions for aromatics, utilities costs and plant locations, among other factors. With the large PX capacity added by recently started crude-to-chemicals complexes and the expected impact of the economic recession on commodities demand, many aromatics complexes face a significant slowdown in the coming months or, possibly, years.

Conventional FCC to maximum propylene production

TechnipFMC Process Technology: Singh, R.  |  Lai, S.  |  Dharia, D.
W. R. Grace: Cipriano, B.  |  Hunt, D.

Fluid catalytic cracking is one of the most important conversion processes used in refineries. This process converts heavy petroleum fractions into lighter, higher-value products, such as gasoline, propylene and others.

Business Trends: Autonomous operations in process manufacturing—Part 1

IBM Corp.: Agnihotri, R.

Progress in the driverless car segment has served to illuminate one of the major future goals in industrial and process manufacturing: autonomous operations in process plants—in other words, the autonomous plant. While AO for process plants has received interest from the process automation and control industry, limited serious discussion has taken place in the process operations and IT domains.

Editorial Comment: Optimizing operations and recognizing achievements

Hydrocarbon Processing Staff: Nichols, Lee

Over the next two months, <ital>Hydrocarbon Processing</ital> will host two separate events for a global audience. One will gather the brightest minds in the industry to share the latest innovations and technologies in the industry, while the other will recognize the leaders in advancing the industry toward safer and more reliable, sustainable and profitable operations. Both events—<ital>Hydrocarbon Processing’s</ital> IRPC and the HP Awards—will be streamed on digital platforms and free to view.

Octane enhancement avoiding both high reformer severity and alkylation

CDE Projects Ltd.: Kauders, P.

An innovative refinery process arrangementa converts butane-rich, light paraffinic streams—preferably containing a high proportion of isobutane—into butylene by dehydrogenation.

Cost-effective naphtha hydrotreating unit revamp to increase high-octane reformate production

Indian Oil Corp. Ltd.: Ramesh, K.  |  Phukan, D.

India, which is the third-largest economy in the world, is home to nearly 18% of the world’s population (nearly 1.4 B).

Managing dark data and visualizing your digital twin

Siemens: Pawlewitz, J.  |  Doyle, A.

Today’s tools are often specialized for a certain type of task; however, they often lack the connectivity that would enable the easy comparison and cross-reference of asset information. Engineering tools are well suited for design and build phases, but may be less suited for use in operations and maintenance.