Engineering & Design
Construction
Ulsan PP Co., a JV between PolyMirae Co. Ltd. (a partnership between LyondellBasell and DL Chemical) and SK Advanced, commissioned its 400,000-tpy polypropylene (PP) facility in June.
Industry Perspectives
The June issue of <i>Hydrocarbon Processing</i> featured the article “A critical analysis of CO<sub>2</sub> capture technologies.”
Control software drives sustainable performance and production
In the face of changing dynamics around the world, hydrocarbon manufacturers are finding the need to not only change strategies, but also to continually adapt those strategies to meet new social and consumer expectations.
Embrace tube metal temperature factor (FT) in fired heater design
Fired heaters are one of the most critical pieces of equipment in a refinery. They
Continuous monitoring of creep in equipment
In this article, the development of a customized program—designed by the author and used at Raffineria di Milazzo—for the continuous monitoring of creep in vessels and piping is explained.
Oil refinery/petrochemical integration in a CO2-constrained world—Part 2
Petrochemical demand will increase with gross domestic product, while the demand for motor fuels will only show modest growth and may even decline in certain regions, given environmental/legislative pressures and the introduction of battery-powered electric vehicles.
MAA refinery—Bunker fuel oil challenge: Stable and compatible VLSFO production
Studies have been conducted on strategies for bunker fuel oil (BFO) production with reduced sulfur and catalytic fines concentration limits.
Dual-mechanical seal arrangement for hot pump service
Selecting mechanical seals for hot services in an oil refinery or petrochemical plant is always a challenging task—and it is a task that needs careful attention, since the wrong seal selection can have a significant impact on pump reliability and availability.
Keeping fugitive emissions costs down with low-E valves
Fugitive emissions have become an increasingly critical area of interest for chemical processing and refining facilities.
Online treatment of a slide valve fault in an FCCU
The regeneration slide valve is a key piece of equipment that controls the ratio of catalyst to oil and reaction temperature in FCC units (FCCUs).
- NAPCOR releases 2024 PET recycling report highlighting system efficiency gains and continued strength of PET circularity 12/12
- OQ courts other partners for petrochemical complex in Oman as SABIC drops out 12/12
- Brazil's BNDES approves $71 MM for carbon storage project 12/12
- Cuba on edge as U.S. seizure of oil tanker puts supply at risk 12/12
- China oil demand to plateau between 2025 and 2030 12/12
- Germany's PCK refinery says no impact from pipeline leak 12/12
