Environment
TOTAL refineries improve overhead systems corrosion and salting with amine-neutralizing technology
Weak organic amines are commonly used in crude unit overhead systems to prevent acidic corrosion from chlorides and other acidic contaminants via a neutralization reaction.
Determining the indeterminate
Standards such as API, ASME and NFPA are applied widely in the refining industry.
Design considerations when flaring ethylene oxide
The flaring of gases released from normal process vents and safety valve discharges following an overpressure scenario is widely practiced in refineries, petrochemical and chemical plants.
A solution to the IMO 2020 MARPOL Annex VI requirement
On January 1, 2020, a new requirement limiting the sulfur content of marine fuel to a maximum of 0.5 wt% went into effect.
Meeting the Tier 3 challenge with ultra-clean alkylate
The U.S. Environmental Protection Agency (EPA) introduced Tier 3 gasoline sulfur standards in 2017, requiring all U.S. gasoline producers to adhere to an annual 10-ppm average sulfur limit.
Leveraging digital technologies to create the smart renewable diesel facility
Many companies are modifying existing crude refineries or building grassroots renewable diesel facilities to produce drop-in, green renewable diesel from a variety of agriculturally derived triglyceride feedstocks.
Reducing acid consumption: Maximizing sulfuric acid alkylation unit profitability
Alkylation is a process used to produce highly branched isoparaffins from the reaction of lighter olefins and isobutane in the presence of sulfuric acid as a catalyst.
Converting a petroleum diesel refinery for renewable diesel
As refiners consider renewable, low-carbon alternatives, renewable diesel—refined from agricultural products using petroleum refinery processes—is gaining traction.
Down with downtime: Repair complex petrochemical components with selective electroplating
The volatile impact of the coronavirus pandemic hit at the same time the petrochemical industry was entering a downcycle.
A novel polymerization retarder with boosted performance and improved handling characteristics
Styrene monomer production plants continually face a need to slow polymerization rates in the purification section of the production process to increase monomer production rates, reduce polymerization/fouling and tar formation, and protect against equipment plugging, especially in the event of unplanned shutdowns.
- Phillips 66 and Kinder Morgan announce open season extension for Western Gateway refined products pipeline 3/25
- Econotherm awarded contract for heat pipe heat exchanger in a Thai refinery 3/25
- Tecnimont awarded $50-MM rehab study contract for Guaracara refinery upgrade project 3/25
- Japanese refiners raise runs as stockpile release begins 3/25
- HyOrc signs binding agreement for European waste-to-methanol project 3/25
- Vietnam's Nghi Son refinery has crude oil for uninterrupted operations until end of May 3/25
