Equipment
Control moisture in ‘wetted’ rotating equipment
In turbomachinery, water is one of the most deleterious contaminants. Left unchecked, moisture can severely reduce the service life expectancy of oil-wetted rotating and reciprocating components by as..
Improve quality of lubricating fluids via filtration
Micro-sized dust particles, along with water, can ruin the best lubricating fluids. Contamination of lubricating fluids can occur due to the byproducts of combustion, metal wear, oxidation and more. T..
Wide design margins do not improve engineering
Engineers use design and safety factors in sizing and specifying instrumentation or major process equipment, such as pumps, valves and compressors. Design factors are applied to cover the uncertainty ..
HCN distribution in sour water systems
Hydrogen cyanide (HCN) is commonly present in refinery gases. Because of its low volatility and, to some extent, its acidity, it travels through amine and sour water systems in an unusual and, heretof..
Optimize viscosity control in refining operations
Petroleum is one of the most important hydrocarbons in the global marketplace. It remains the primary source for liquid and transportation fuels, and it is the building block for product manufacturing..
HP Reliability: Was that a failure or ‘just a repair’?
Purists among reliability professionals are sometimes concerned about the accuracy of the measurement of the mean-time-between-failure (MTBF) of an asset. There are many ways to conduct this failure f..
HP Water Management: Best practices for RO operations
Widespread use of reverse osmosis (RO) technology in industrial applications began in the late 1980s, following the introduction of polyamide materials that had a significantly higher permeate flow an..
Chemical-grade operation—or not?
The quality of transportation fuels has evolved. Earlier, the fuel quality was based on octane to power larger engines for automobiles and cetane for commercial trucks. As lead was phased out of gasol..
Optimize relief loads with dynamic simulation
Pressure relief analysis is a critical task at the engineering design stage of a grassroots oil refinery project. Relief loads must be determined so that the process units and plant flare systems can be designed.
Mitigate heat exchanger corrosion with better construction materials
Better materials can provide optimal equipment service life, reduce maintenance, mitigate contamination by corrosion products and minimize heat loss due to fouling.
- ITT to acquire SPX Flow for > $4.77 B, expanding leadership in highly engineered components and adjacent flow technologies 12/5
- MOL Group introduces eco-friendly Bag-in-Box packaging for lubricants 12/5
- Addis Energy secures $8.3 MM to scale its transformative approach to low-cost ammonia production 12/5
- World Fuel Services supplies cruise line with waste-based biofuels 12/5
- Chevron announced $18 B-$19-B CAPEX budget for 2026 12/5
- Russia and India sign deal to build urea plant in Russia 12/5
