Boilers
Optimizing the dehydration process with advanced process simulation
In the operation of natural gas pipelines, a blockage or leak can cause expensive production losses, damage equipment and pose safety hazards.
Improve removal of phenolic and amine compounds in a sour water stripper
Joint stripping in a refinery sour water stripper (SWS) unit contributes to the concentration of phenols and total nitrogen (N) in the discharged treated water from the wastewater treatment unit.
Recommended practices for fired process heater instrumentation and control
Fired process heaters are one of the most critical pieces of equipment within many refinery and petrochemical facilities. Proper instrumentation and control of the equipment has direct bearing on the successful operation of the process, as well as on overall facility process safety.
Amec Foster Wheeler awarded oil shale fired CFB boilers contract in Jordan
LONDON – Amec Foster Wheeler announces today that it has been awarded a new contract by China Energy Engineering Group Guangdong Power Engineering Co., Ltd., for the design and supply of two circulating fluidized-bed (CFB) steam generator boilers, as well as technical advisory services.
Improve the operation of fired heaters
Fired heaters or “process furnaces” are used extensively by the refining and petrochemical industries. These heat transfer units generate the much needed process energy through the combustio..
HP Project Management: Energy efficiency: Getting in early pays off exponentially
There are many situations and circumstances when it makes good sense to pursue energy efficiency for industrial processes. But when is the best time for such action?Better operating practicesIn existi..
Multi-faceted approach on energy efficiency methods
The hydrocarbon processing industry (HPI) is a high-energy-consuming business. After cost for feedstocks, energy is the next largest operating expense for an HPI facility. Since the first oil embargo ..
Improve performance of exchangers in quench-water services
Dual-enhanced (DE) tubes are widely used in shell-and-tube heat exchangers (HEXs) in a range of industries. They have become a standard in multiple clean services for the hydrocarbon processing indust..
Automate furnace controls to improve safety and energy efficiency
Furnace firing is the biggest single operating expense in any refinery. Consider a medium-size refinery (250,000 bpd) that consumes 2,000 MMBtu/h. At a cost of $5/MMBtu, that’s $87.6 MM/yr being ..
BETE obtains ASME code certification for boilers, pressure vessels
BETE is the first spray nozzle company to obtain these ASME and National Board stamps.
- India receives fuel oil cargo in Russian SCF tanker after brief halt 4/26
- Biden administration (U.S.) to release SAF tax credit model 4/26
- Boeing, Wagner advance Australia’s SAF Industry 4/26
- S-Oil expects Q2 refining margins to remain steady then trend upward 4/26
- Vitol to charter supertankers from U.S. to Nigeria's Dangote refinery 4/26
- Refiner Valero beats profit estimates on resilient demand, tight supplies 4/26