Environment & Safety Gas Processing/LNG Maintenance & Reliability Petrochemicals Process Control Process Optimization Project Management Refining

Hydrotreating

History of the HPI: The 1990s: Clean fuels and emissions mitigation, M&A, GTL and the fieldbus wars

Hydrocarbon Processing Staff: Nichols, Lee

Much like several initiatives passed in the 1970s and 1980s, the 1990s were a decade heavily focused on environmental issues, with many new regulations being enacted to not only mitigate industrial and vehicle emissions but also to advance the production of clean fuels globally.

Hydroprocessing catalyst reload and restart best practices—Part 2

PetroQuantum: Dyke, S.
Global R&D: Pongboot, N.

Hydroprocessing (hydrotreating and hydrocracking) units are high-pressure, high-temperature units that have multiple reactors, multiple beds per reactor and specialized metallurgy. Catalysts in these units are replaced on a 2 yr–5 yr cycle, depending on feed quality, unit design, catalyst selection, operational constraints and performance.

Hydroprocessing catalyst reload and restart best practices—Part 1

PetroQuantum: Dyke, S.
Global R&D: Pongboot, N.

Hydroprocessing (hydrotreating and hydrocracking) units are high-pressure, high-temperature units that have multiple reactors, multiple beds per reactor and specialized metallurgy.

Fouling in hydrogen recycle gas compressors

TurboTech Consulting Corp.: Zardynezhad, S.

Hydrogen recycle gas compressors are one of the most significant rotating equipment in oil refineries, petrochemical plants and upgraders.

New practice of diameter-transformed fluidized bed reactor in the petrochemical industry

SINOPEC Research Institute of Petroleum Processing (RIPP): Wang, X.  |  Xu, Y.

Motor gasoline standards are becoming increasingly stringent—in particular, the olefins content requirement in motor gasoline is getting lower and lower. Among these standards, China standard motor gasoline VI (B) requires that the olefin content should be < 15 vol%.

How hydroprocessing feed filtration system design impacts process reliability and efficiency

Filtration Technology Corporation: Worrell, J.  |  Clements, M.  |  Echeto, S.

Oil refining is an exceptionally complex industry, with much of the inherent complexity stemming from wide regional variances in crude quality and composition, plant capabilities and the types of products produced.

Hydrocarbon Processing 2021 Awards FINALISTS

Hydrocarbon Processing Staff: Nichols, Lee

<i>Hydrocarbon Processing</I>, the downstream processing sector’s leading technical publication for nearly 100 yr, has announced the finalists for its fifth annual <i>HP</i> Awards, which celebrate innovative technologies and people that have been instrumental in improving facility operations over the past year.

Management of LPG pool in a complex refinery

Tüpraş: Saka, A.  |  Kutman, D.

LPG pool management is becoming more important as the regulations on the product specifications tighten.

Oil refinery/petrochemical integration in a CO2-constrained world—Part 2

Fluor: Baars, F.  |  Oruganti, S.  |  Kalia, P.

Petrochemical demand will increase with gross domestic product, while the demand for motor fuels will only show modest growth and may even decline in certain regions, given environmental/legislative pressures and the introduction of battery-powered electric vehicles.

Oil refinery/petrochemical integration in a CO2-constrained world—Part 1

Fluor: Baars, F.  |  Oruganti, S.  |  Kalia, P.

Petrochemical demand will increase with gross domestic product, while motor fuel demand will only show modest growth and may even decline in certain regions, given environmental/legislative pressure and the introduction of battery-powered electric vehicles.